PDA

View Full Version : '95 300ex Vs. '02 350 warrior


4x4_war
07-20-2010, 07:44 AM
hi i have a 95 300ex and was wondering what the differences are between mine and a 02 yamaha warrior.

Which is faster stock?

Are there parts readily availible for warriors like there are hondas?

Are the parts between blaster/warrior interchangable like the hondas?

dependability? (never had hardly any problems except the carb with my honda)

thanks,
Tyler
4x4_war
07-20-2010, 07:57 AM
my quad
http://i26.tinypic.com/2hd6umr.jpg

Quad im looking at:
http://i30.tinypic.com/z0mkl.jpg
beastlywarrior
07-21-2010, 01:34 PM
warriors are faster but also heavier and bigger. dependability is like the 300 and 400ex. a little aftermarket helps a lot in performance of these things too. theres also a good used part availibility and not much is interchaingeable with a blaster

try checkin out yfm350.com and check out the elite and g.b.n.f. under pics
warrior/exrider
09-13-2012, 01:39 PM
Well I have a 03 400 and a 98 warrior, warriors built like crazy but my 400 barely beats it and its got a few upgrades, the warrior is deffinetly fast but it takes a lot to make it a beast and its not near as reliable
sm00th026
10-05-2012, 08:52 PM
Originally posted by 4x4_war
hi i have a 95 300ex and was wondering what the differences are between mine and a 02 yamaha warrior.

Which is faster stock?

Are there parts readily availible for warriors like there are hondas?

Are the parts between blaster/warrior interchangable like the hondas?

dependability? (never had hardly any problems except the carb with my honda)

thanks,
Tyler
I had a 350 warrior and it did not impress me one bit. I built it from the ground up (back stock) thanking it's going to be bad *****.But it was a Big Disappointment.So I traded it for a 250x Honda and 185atc honda. Stock for stock it was the same.This is My thought! 300ex would be better Because the 250x/300ex has a four valve head versus the two valve head that the warrior has. (better performance) Plus the warrior's head is poorly built with a needle bearing for the inter bearing on the cam (weak point) Trust me, I know that for a fact! The 250x/300ex has ball bearing's to hold there cam. Only good thing with a warrior is It's a six speed. That's all I see...But that's just me..