parting out a 250X

[blacknblue#2]

Im parting out my 1987 Honda 250X that i started restoring back in the winter. I have lost interest and time now that im settin up a house so the money would help alot. Its a complete quad. THe frame was just powdered silver along with the swingarm. THe axle bearings and swingarm bearings are brand new never rode on. Tell me what you need and i will get you a picture and price. THe quad is 85% together right now and i will pull parts off as ppl ask about them

[blacknblue#2]

bump

[f4istunna]

what axle is in it? straight? How much for axle and all hubs (wheels, brake and sprocket)

[blacknblue#2]

Its a stock axle. its straight and the hubs are in good shape. hows 50 bucks shipped to you sound for the axle and all 4 hubs

[f4istunna]

sounds good. Can you send a pic ? sta500bmx@hotmail.com

paypal?

[cik orange]

what do you want for kick start cover

[blacknblue#2]

f4istunna the quad is at my dads i will go over tomorrow after work and get the pic and send it your way.........cik orange im not sure what that side cover is worth it is mint wit no cracks. PM me an offer shipped to your door. im not hard to deal with.

[f4istunna]

ok thanks

[mod_driver43]

do you have complete motor?

[blacknblue#2]

Originally posted by mod_driver43
do you have complete motor?

if cik orange dont take the side cover than i will have a 100% complete motor. Ive never heard ir run. I went through it and cleaned it up and put a set of rings in it but i had an electrical problem that i never fixed before i lost interest.

[mod_driver43]

i would take it without the cover. just let me know how much.

[blacknblue#2]

Originally posted by mod_driver43
i would take it without the cover. just let me know how much.

it has one cracked crank case. it has been JB welded and never leaked but wanted to tell you that up front. Everything else was good and do you want the carb with it? PM me an offer

[smorris1]

do you have the stock muffler and how much? Thanks

[mod_driver43]

pm sent

[blacknblue#2]

Originally posted by smorris1
do you have the stock muffler and how much? Thanks

sorry no muffler. it was junk

[blacknblue#2]

bump

[f4istunna]

$$ sent for the axle thanks man.

[blacknblue#2]

lots of stuff left.

[macattack]

Still have frame? Do you have clean title for it?

[f4istunna]

super fast shipping. Thanks again !!

[blacknblue#2]

Originally posted by macattack
Still have frame? Do you have clean title for it?

i have the frame and its mint. I dont have a title. im not even sure that they issued titles in 1987. All numbers are still on it.

[blacknblue#2]

bump. lots left

[macattack]

Looking for:

Seat latch
After Market handlebars (silver/aluminum)
Exhaust heat shield
Tool kit
Engine Skid plate
Rear brake parts

[blacknblue#2]

i have a seat latch. moose bars, a heat shield, the engine skid and the rear brake caliper. Not the rotor though.

[blacknblue#2]

still plenty left.

[87xproject]

what colors are the plastics? need a tank cover...the bigger of the two

[blacknblue#2]

the plastics are gray with a red tank cover

[dman66]

What condition is the front master cylinder in? What is the swingarm like? P M pics if you have. Thanks

[blacknblue#2]

the master cyl is gone but the swingarm is like brand new. it was just powdered silver with new bearings put in it about 6 months ago and never was rode on.

[blacknblue#2]

still lots left. dont wanna mess with ebay fees