PDA

View Full Version : Anyone with Tinner's airscoops...


Guy400
02-03-2003, 09:23 AM
I have these in a box here but haven't installed them yet. Just by looking at them I've got one question. What happens to the lower fender mount when you put the scoops on? I'm assuming that little rod has to be removed because the scoops mount in that location. Do the fenders just flap then?

Thanks
Scott400EX
02-03-2003, 09:53 AM
u can get scoops with a hole drilled in it already for the fender mount. If you dont have holes no mount for you unless you drill them yourself
Guy400
02-03-2003, 10:37 AM
That's what I figured I'd have to do. I'll have to run to the store and buy a new holesaw cause 2-1/2" is probably a little big:D
DEAL
02-03-2003, 11:04 AM
Yeah. In most of his scoops there is a hole drilled there for the mount.
Castor-426ex
02-03-2003, 11:09 AM
use a drill bit....lmao
RytM1
02-03-2003, 06:14 PM
When I got my scoops from Tinner, I wasn't sure if I was going to need the hole in them for the support or not (due to running cut fenders). He sent them to me without the holes, but marked the back side of them where I could drill a hole if I felt the need to.
tinner
02-03-2003, 07:32 PM
Yes, there should be a scribe mark on the back for the holes. If anyone is ever in question about this, please ask me for details.I think I always ask, but who knows. I don't want anyone to be unhappy. If you ever get something that doesn't seem right (holes or not) please contact me to get you set up with the right ones. Tell your friends, I have slick new Z400 scoops.:D
Pappy
02-03-2003, 07:38 PM
Originally posted by tinner
Tell your friends, I have slick new Z400 scoops.:D

you know we are running 3 z400's in the gncc's this year:devil


GO TEAM TINNER!!!!!!!!!!!!:D :macho
Guy400
02-03-2003, 07:41 PM
Tinner, the fit was great on the scoops and all the hardware fit like a glove. Upon closer inspection of these scoops I do see the scribed mark for the holes. What size hole do you recommend? My mounting tabs are welded onto the support rod on both ends so I'm guessing it would have to be roughly 1".
tinner
02-03-2003, 07:52 PM
One inch, you got it. I am glad you like them.
QuadTrix6
02-06-2003, 06:20 PM
i love my scoops
GNCC#829
02-06-2003, 06:50 PM
I just put my tinners on and they don't have the GCD stickers on them. I must have gotten a defective pair!?:( :D
OutlawEX
02-06-2003, 08:22 PM
tinners are very nice
shamisc
02-06-2003, 10:18 PM
Where can I get some Tinners?
GNCC#829
02-06-2003, 11:59 PM
From tinner. PM him and he will let you know the details.
rookiex
02-07-2003, 12:30 PM
tinner if I got around 500 dollars would you make me scoops and a air box...and maybe a oil tank?? if you can...
QuadTrix6
02-07-2003, 12:34 PM
is tinner around ne more, i havn't seen him post in awhile...i hope he's ok :confused:
tinner
02-09-2003, 11:00 AM
Hey Fellas, I've been around, just busy with alot of different things. I am still making scoops, also I have new ones for the Suzuki & Kawasaki 400's. Right now, until I have my new shop it will be tough for me to do any airboxes or anything like that. We will be building this spring, and hopefuly it will allow me to do more things. Once my stickers come in, I will get some out to those who still needed them.

Jim
BigThumper33
02-09-2003, 11:30 AM
good I was wondering where my stickers were lol