PDA

View Full Version : Cracked case repair



riding4fun
07-03-2010, 11:48 PM
I saw that there was oil leaking from the underside of the transmission just below where the transmission bearings are.

My question is, when I take out the bearings will I find the inside cracked also and do I just take it in to get welded from the inside and outside. Will that be ok?

Darrell

Nichols Atvs
07-04-2010, 03:47 AM
could be cracked or the oil seal insde is gone or the brass bushing inside is loose . all depends on how big crack is to weld .

raidernut
07-05-2010, 09:53 AM
Darrel

check outer seal first, it may have popped out. Then if you find a crack, get a hold of Carl from the races, he has welded them in the past.

riding4fun
07-05-2010, 03:24 PM
Originally posted by raidernut
Darrel

check outer seal first, it may have popped out. Then if you find a crack, get a hold of Carl from the races, he has welded them in the past.

Thanks, there is definitely a small crack, I can see the oil oozing out.

Coley'sdad#8
07-06-2010, 09:45 AM
call BP they should be able to stop that huge 4oz. oil leak:rolleyes: