View Full Version : Cracked case repair
riding4fun
07-04-2010, 12:48 AM
I saw that there was oil leaking from the underside of the transmission just below where the transmission bearings are.
My question is, when I take out the bearings will I find the inside cracked also and do I just take it in to get welded from the inside and outside. Will that be ok?
Darrell
Nichols Atvs
07-04-2010, 04:47 AM
could be cracked or the oil seal insde is gone or the brass bushing inside is loose . all depends on how big crack is to weld .
raidernut
07-05-2010, 10:53 AM
Darrel
check outer seal first, it may have popped out. Then if you find a crack, get a hold of Carl from the races, he has welded them in the past.
riding4fun
07-05-2010, 04:24 PM
Originally posted by raidernut
Darrel
check outer seal first, it may have popped out. Then if you find a crack, get a hold of Carl from the races, he has welded them in the past.
Thanks, there is definitely a small crack, I can see the oil oozing out.
Coley'sdad#8
07-06-2010, 10:45 AM
call BP they should be able to stop that huge 4oz. oil leak:rolleyes:
Powered by vBulletin® Version 4.2.1 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.