250r parts

[TRX350X]

I have some parts for sale from a 1986 TRX250R.

Stock A-arms and tie rods - Black $50 shipped

Stock Swingarm with bearing carrier
(prolly needs bearings) - Blue $60 shipped SOLD

Stock cylinder with used standard bore piston and stock head. Engine ran good when taken apart (good compression) - $130 shipped SOLD

Stock Keihin 34mm PE carburetor - came off running bike - $35 shipped

Pyramid Reed Cage with boot to carb, good condition- $50 shipped

ITP Aluminum Baja Wheels (beadlock) with Razr MX Tires
Wheels are 8x8, one has the holes reamed out...would need to be fixed to work. Tires have 50% tread. - $100 shipped

Paul
bethy012345@hotmail.com

[TRX350X]

bump

[LathersR]

Hows the piston look? Got pics? Ill send 100.00 paypal for the cylinder, piston, head

[TRX350X]

The engine ran strong when it was taken apart. I went with a 350 PV. The piston is 67mm, so it still has some bores left. It's actually 254 cc's. All you would need is the gasket and wrist pin circlips. The cylinders go for $100 on Ebay and I am including the piston, rings, and head. I'd like to stay firm on the $130 including shipping. I will be listing this and some other parts on Ebay in a day or two.

Pic 1

[TRX350X]

Pic 2

[LathersR]

110 shipped keep the head? whats ur paypal addy?

[250rbadboy]

would you take $40 for the swing arm if we picked it up?

[TRX350X]

$110 shipped with out the head is fine. My paypal ID is bethy012345@hotmail.com

[TRX350X]

$40 for the swingarm is fine, if you come and pick it up. I am in Salem, NJ now. Where are you coming from. I could leave it at my Dad's in Atco.

Give me a call (856)430-6313

[TRX350X]

250r stock a-arms and tie rods
250r stock swingarm / swing arm and bearing carrier SOLD
250r stock cylinder, piston, and head (came from strong running bike) SOLD
Keihin 34 mm PE carburetor carb
Pyramid Reed Cage Reeds and boot
350x axle
300ex steering stem SOLD
clutch cover
stator cover
300ex a-arms SOLD
300ex tank cover plastic
Honda rear rims wheels
1 ITP Baja wheel beadlock
1 Holeshot Rear Tire (20")
1 Fast Trekker front tire and wheel SOLD
Maxxis Razr tires 18x10x8 (50% tread)
350x rear sprocket
front wheel spacers SOLD
300ex bottom end motor engine

Paul
bethy012345@hotmail.com
(856)430-6313

[LathersR]

what yr is the cylinder? im going to send the money today

[TRX350X]

it's an 86

[LathersR]

i sent the money ill pm you the correct address

[3racers]

would you take 75.00 for reed cage and carb?

[TRX350X]

$75 shipped is fine. That is for the P yramid Reed Cage, boot, and carburetor. I actually have a PJ and a PE carburetor. Both are from 250r's and both are 34mm. Which one do you want?

[TRX350X]

bump

[LathersR]

i sent a pm

[FastHonda400ex]

Is the PJ carburetor and 86 flat slide carb? Is it complete? How much do you want for it?

Let me know.

Thanks,

Doug

[TRX350X]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250676767288&viewitem=&sspagename=STRK%3AMESELX%3AIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=250676769925&viewitem=&sspagename=STRK%3AMESELX%3AIT