What sprocket size??

[RUFIO]

Idk what sprocket size to get..I want to gain some acceleration but i dont want to loose my top end....what size would you say would do that for me?:confused: :huh :confused2

[JOEX]

You can't have your cake and eat it too....
It's one or the other, what is more important?

Joe

[RUFIO]

lol i want both. :devil but idk what do u thinks more important when trying to beat a 240 blaster

[JOEX]

You admit to being beat by a blaster!:huh LOL:devil j/k
It depends on where the blaster is beating YOU at...Is it faster or quicker? And what is important to YOU not us ;)

Joe

[NoWingNoPrayer]

well stock is 15 and a 38.
alot more torque would be a 14 and a 38.
if you want just a little more i would get a 15 and a 39.
if you want more speed get a 16 and a 38.

[tprender]

From what you want you better get some type of exhaust and then you might have a chance. You are rusing a stock motor up against a well built 240 motor. The exhaust will be helpful than the sprocket.

[Fluid400]

Ive got a 16 with the stock 38

[y2k400ex]

I'm running a 16 tooth fron and the stock 38 rear. When i race a freind of mine running 15 38 I will get him about 2 quad lenght off the line and to the top. both our 400ex are the same exact mods too. the 16 tooth will give you speed I didnt lose any bottom end at all I can still pull the fromt end up in second.:) :D :devil

[Fluid400]

you go joey. Scott will soon be faster though:macho :blah :devil

[KAWSAM62]

yes i will:D

[y2k400ex]

:devil :devil :devil untill I get my 416 :devil :devil :devil

[KAWSAM62]

and what makes you think your old enough to get one? you have got to be at least 25 to buy a 416 i read that on some web site somewhere that a mans ride:D :devil :devil :macho :macho :blah :blah

[y2k400ex]

Scott do you get a AARP discount?:macho :blah

[OutlawEX]

I change my sprockets depending on the track conditons..Also ur trying to beat a blaster..Upgrade on the blasters weakness

[PHIL_B54]

does the stock casesaver work with the 16 tooth sprocket? is there enough adjustment in the chain? you really like the 16? i run flat out gravel roads, and harvested feilds, someday id like to go to little sahara

i think id like the top end and im not to worried about losing the low (within reason).

thanks

[luvmyex]

You guys running a 16 you must have 18" tires or live on the beach.When i put 22" tires on i couldnt get up half the hill around here without staying in 1st gear.And it would be compleatly wound out.If i tried to hit 2nd it would just bog the crap out of it.So i went to a 14th.
And if your getting 2 bikes off the line and you have a 16 to a 15.That guy cant ride.He should be smoking you until about 3rd gear when you would be blowing by.

[RUFIO]

Beating the blaster is the last of my worries, im sure i will win, i just wanna make sure its by a long shot. So a 16-38 willl give me the more topeend without loosing to much accel.?

[KAWSAM62]

no not yet but when i put you out on the corner there wont be any discount there either:eek: :eek: :eek: :eek: :eek: :eek: :eek:

[Fluid400]

Originally posted by PHIL_B54
does the stock casesaver work with the 16 tooth sprocket? is there enough adjustment in the chain? you really like the 16? i run flat out gravel roads, and harvested feilds, someday id like to go to little sahara

i think id like the top end and im not to worried about losing the low (within reason).

thanks


you will have to modify the stock case saver a bit. Pretty simple just a little gringing on the inside curve untill you have good clearance. we ride mostly in the woods, tons of whoops and it work great.

[KAWSAM62]

feels like a overdrive saves on reving the motor on miles of power line roads running a constant 55 to 60:cool:

[Fluid400]

whats up homey (kawsam62) Where is your B*~*%* today

[PHIL_B54]

thanks , thats the next mod when i get time