View Full Version : what did you use to shave your fenders
ive heard of hacksaw blades and even sharpened flatheaded screwdrivers wat did u use 2 shave the fendrers on ur 250X 300EX 250EX 400EX raptor banshee or blaster ? please attach files if have any:D
i used a hacksaw blade specifically for plastic,,,,,,it gives a real fine cut with little clean up to do......
......i also have a dremel.......but you can mess up real quick with those cutting drill bits:eek:
tants
02-02-2003, 05:23 PM
i just used a hacksaw and a elc. sander to clean it up...
crappy pic...
Moto92
02-02-2003, 05:57 PM
jig saw with a fine tooth blade
electrical tape works great to mark the line you are wanting to cut
Juggalo
02-02-2003, 06:08 PM
i used a utility knife
AtvMxRider
02-02-2003, 06:39 PM
I used a Dremel.:D
Ralph
02-02-2003, 07:37 PM
kitchen knife:scary:
NoWingNoPrayer
02-02-2003, 07:59 PM
First off Dont use a SAWZAW!!!!!!!
hacksaw seems slow to me..
i used a makita angle grinder with a diamond blade on it. it worked exelent!! took about 3 minutes to do..
Tip: mark the fenders with a marker first!!!
OutlawEX
02-02-2003, 09:04 PM
I used a jig saw..and a utility knife to clean it
I used a hack saw and sanded it down.
Older Last one. Warrior's getting a new paint jod with real paint so no complainers!
K_Fulk
02-03-2003, 07:15 AM
Originally posted by NoWingNoPrayer
First off Dont use a SAWZAW!!!!!!!
I used a sawzaw but make sure you get them layed out the way you want with tape first.
Fluid400
02-03-2003, 10:05 AM
what are the pro's and con's to shaving your fron fendors, other than looks.
Originally posted by Fluid400
what are the pro's and con's to shaving your fron fendors, other than looks.
Pro's well i like the looks better,,,,,,,,,,,,,,
one con i can think of right off is the lack of protectionfrom flying debris..........turn the front tires going into a corner and you will get a shower of mud, or tacky dirt,,,,,,,,,or even a rock.
Happens to me all the time...........but i like the looks enough to put up with it,,,,,,,,,and if i would wear my helmet all the time it wouldnt get in my eyes:o :eek: :confused2
Str8Wicked
02-03-2003, 10:29 AM
dremel works perfect.
K_Fulk
02-03-2003, 11:49 AM
Originally posted by Fluid400
what are the pro's and con's to shaving your fron fendors, other than looks.
Less wind resistence there for you go a little faster.
I used FullBore Innovations :D
i used a rotozip. DONT EVER USE ONE! It just ripped through the plastic so uneven and scratched it up. i had to sand alot. still looks good though
racerx573
02-04-2003, 06:20 PM
I used a hacksaw blade w/ duct tape as a handle.
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.