92 250x
06-28-2010, 12:09 AM
Well noticed my quad got a bent frame so im parting her out to fund towards a 450r.
Works front shocks,these look brand new. No nicks or anything. Not blown out and work good always ran shock covers. There dual rates with no rezzies.
150+shipping.
2003 swingarm with new bearings that need installed,have to press out the old races,swing arm is in awsome shape still has the sticker on the rear of it. Also comes with a new nice swingarm pivot bolt and nut.
80+shipping.
Lsr carrier. The nice billet one not cast junk. Bearings are nice it is mint no cracks or nicks.
100+shipping.
Durablue +2--+4 axle. Great shape looks brand new. Comes with the end nuts,cotter pins and the spacers.
150+shipping.
LSR billet sprocket hub. Soo much nicer than the stock junk one.
50+shipping.
Wave rotor for the rear in awsome shape.
25+shipping.
Banshee rear shock. Direct bolt on and is a **** ton better than the stock pogo sticks!
40+shipping.
Full fmf megamax pipe. Header is in good shape with a tiny tiny dent and some plastic melted on it. A great pipe and sounds nice better than the stock restrictive stuff.
100+shipping.
330ex big bore cylinder. I have to measure what the current bore is but i belive it is stock,may need a hone or bore. But cylinder is in amazing shape.
100+shipping.
Ported and polished head. Has good exhaust studs. Also has valves and spring in it also. Came off a working and ripping quad.
145+shipping.
White brothers or kibble white valve spring set. All there all keepers and springs in nice shape too.
50+shipping.
Rear brake set up. Includes everything. Has a lsr block off plate on it. Pads may need replaced after some rides. Worked amazing and locked them up awsome. Good shape unlike most 250x calipers.
60+shipping.
Front brake set up. Includes nice working calipers. Good pads. All brake lines,lever and resivor. Made me do little stopies!
60+shipping.
Good shape rear hubs. Have 2 sets,one has good paint other really ****ty.
Good paint- 20+shipping.
Bad paint- 10+shipping.
Good stock cylinder head. Has good valves and springs. No porting done. Also has good exhaust studs in it too.
50+shipping.
Stock cam and gear with good bearings.
25+shipping.
Stock valve cover with nice rockers. Not worn like most notorious heads on 250x/300exs.
40+shipping.
Stock cylinder and piston and rings. Has some rust in cylinder? Was like that when i tore it off of my running quad. Needs a hone and some fresh rings more than likely but it ran good. Stock bore and piston.
75+shipping.
250x bottom end. Has ebc clutch springs in it. Spins flawless goes through all gears nice. Will need a flywheel side cover. Rod side play is in honda tolerances. Throw your top end on time it and go.
150+shipping.
250x bottom end. Spins nice and is clean. But the rod is frozen. I have a spare good in tolerances honda crank but dont feel like putting it in.
50+shipping.
250x cylinder it does have a nice gouge and is stock bore and will need to go .40 over.
20+shipping.
TONS of electrical,250x harness,cdi,rectifier,ect. Also has 300ex stuff too. Take the bundle.
40+shipping.
Stock carb in awsome shape. Has 3 new jets. 130,135,140. Also has a nice cable and throttle.
55+shipping.
2 stock front shocks decent shape bushings are going to need replaced.
10+shipping.
2 stock rear shocks one ok shape other good shape.
10+shipping a piece.
New renthal front sprocket. 13tooth.
20+shipping i payed 30+shipping.
Stock a arms with good balljoints. ****ty paint and the bushings were it goes on the frame are worn.
35+shipping.
Stock bumper in awsome shape.
10+shipping.
Gray race cut front plastics with red tank cover and hood. All parts there and there clean for there age.
35+shipping.
300ex rotors and hubs. Good bearings and rotors. Also includes the spindles. Nice swap for a 87 250x if you have the small bolt patter so you can use more wheels.
25+shipping.
I will list more tomorrow. Thats all i know off the top of my head right now.
I accept paypal only after i fix the account. Have a verified account and ebay refrences and refrences here too.
Pics on request. Will work on certain prices.
Thanks!
Chris.
Works front shocks,these look brand new. No nicks or anything. Not blown out and work good always ran shock covers. There dual rates with no rezzies.
150+shipping.
2003 swingarm with new bearings that need installed,have to press out the old races,swing arm is in awsome shape still has the sticker on the rear of it. Also comes with a new nice swingarm pivot bolt and nut.
80+shipping.
Lsr carrier. The nice billet one not cast junk. Bearings are nice it is mint no cracks or nicks.
100+shipping.
Durablue +2--+4 axle. Great shape looks brand new. Comes with the end nuts,cotter pins and the spacers.
150+shipping.
LSR billet sprocket hub. Soo much nicer than the stock junk one.
50+shipping.
Wave rotor for the rear in awsome shape.
25+shipping.
Banshee rear shock. Direct bolt on and is a **** ton better than the stock pogo sticks!
40+shipping.
Full fmf megamax pipe. Header is in good shape with a tiny tiny dent and some plastic melted on it. A great pipe and sounds nice better than the stock restrictive stuff.
100+shipping.
330ex big bore cylinder. I have to measure what the current bore is but i belive it is stock,may need a hone or bore. But cylinder is in amazing shape.
100+shipping.
Ported and polished head. Has good exhaust studs. Also has valves and spring in it also. Came off a working and ripping quad.
145+shipping.
White brothers or kibble white valve spring set. All there all keepers and springs in nice shape too.
50+shipping.
Rear brake set up. Includes everything. Has a lsr block off plate on it. Pads may need replaced after some rides. Worked amazing and locked them up awsome. Good shape unlike most 250x calipers.
60+shipping.
Front brake set up. Includes nice working calipers. Good pads. All brake lines,lever and resivor. Made me do little stopies!
60+shipping.
Good shape rear hubs. Have 2 sets,one has good paint other really ****ty.
Good paint- 20+shipping.
Bad paint- 10+shipping.
Good stock cylinder head. Has good valves and springs. No porting done. Also has good exhaust studs in it too.
50+shipping.
Stock cam and gear with good bearings.
25+shipping.
Stock valve cover with nice rockers. Not worn like most notorious heads on 250x/300exs.
40+shipping.
Stock cylinder and piston and rings. Has some rust in cylinder? Was like that when i tore it off of my running quad. Needs a hone and some fresh rings more than likely but it ran good. Stock bore and piston.
75+shipping.
250x bottom end. Has ebc clutch springs in it. Spins flawless goes through all gears nice. Will need a flywheel side cover. Rod side play is in honda tolerances. Throw your top end on time it and go.
150+shipping.
250x bottom end. Spins nice and is clean. But the rod is frozen. I have a spare good in tolerances honda crank but dont feel like putting it in.
50+shipping.
250x cylinder it does have a nice gouge and is stock bore and will need to go .40 over.
20+shipping.
TONS of electrical,250x harness,cdi,rectifier,ect. Also has 300ex stuff too. Take the bundle.
40+shipping.
Stock carb in awsome shape. Has 3 new jets. 130,135,140. Also has a nice cable and throttle.
55+shipping.
2 stock front shocks decent shape bushings are going to need replaced.
10+shipping.
2 stock rear shocks one ok shape other good shape.
10+shipping a piece.
New renthal front sprocket. 13tooth.
20+shipping i payed 30+shipping.
Stock a arms with good balljoints. ****ty paint and the bushings were it goes on the frame are worn.
35+shipping.
Stock bumper in awsome shape.
10+shipping.
Gray race cut front plastics with red tank cover and hood. All parts there and there clean for there age.
35+shipping.
300ex rotors and hubs. Good bearings and rotors. Also includes the spindles. Nice swap for a 87 250x if you have the small bolt patter so you can use more wheels.
25+shipping.
I will list more tomorrow. Thats all i know off the top of my head right now.
I accept paypal only after i fix the account. Have a verified account and ebay refrences and refrences here too.
Pics on request. Will work on certain prices.
Thanks!
Chris.