View Full Version : checking plug color with race fuel ?
HOT-ROD
02-02-2003, 03:22 PM
i'm running 93 and 117 octane mixed 50/50 . will it burn a lighter color with this mixture ? heres what its running in [ 416 with 11;1 comp 39 fcr with a 52 pilot and a 180 main jet . my plug is burning lean i think .
YZROOSTINYA
02-03-2003, 04:18 AM
lead will tend to make the plug silver/white
as opposed to tan, 180 seems big?
HOT-ROD
02-03-2003, 03:25 PM
Originally posted by YZROOSTINYA
lead will tend to make the plug silver/white
as opposed to tan, 180 seems big? would it be running leaner with that mixture rather than staight pump gas ?or will the plug just burn a cleaner color ?
HOT-ROD
02-05-2003, 03:47 PM
Originally posted by HOT-ROD
would it be running leaner with that mixture rather than staight pump gas ?or will the plug just burn a cleaner color ? any info ??????
YZROOSTINYA
02-06-2003, 04:40 AM
i am almost positive it actually richens up the jetting with race fuel. but some people say it leans it because of the added oxygen in the fuel. i just went up in jetting as i went with a higher flow exhaust and reed cage when i had my yz and it ran great.
your best bet would be to contact VP racing fuels or whatever fuel brand your using. 117 and 93 seems to high.
personally 108 and 93 would do you just fine. you really dont want to go above 100 octane, your only at 11:1 right?
i would just jet it on pump and then mix it to race and see what your results are, i am at a 158 main cuurently
From experience the higher oct race fuels will "richen" it up.
YZ did you notice he is running the FCR? I am not sure how the 180 relates in that carb.
I am currently running between 178 and 185 on the main due to the cold weather but jetting has been a nightmare lately with the 20-30 deg temp changes, but mostly in the needle position cause it wants to be in the middle.
To answer the original question, what was that again :)
I hear that the plug color can change from brand to brand so calling the MFG of the feul is a good idea.
My local guy has VP114 and it seems to go from drk beige or brown to full black.
And yes it seems like too high a mix unless your actual comp is higher than the piston rating you gave.
HOT-ROD
02-06-2003, 04:51 PM
its running pretty good , so i think i'll leave it where its at
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.