bolt problems... need help!

[atvracin74]

ok so the bolt head is fine and it will turn when i turn it but it will skip and restart ive tryed yanking it out and i dont want to drill it out considering its a gas tank that this bolt is in... any advice at all will help!

[nskukalek79]

The nut in the tank is probably spinning with the bolt...this is a common problem for the 450r....get a drill and put a socket in it that fits the bolt head and just spin it for a min or two fast so it heats up, after it get hot you can just pull the whole nut and bolt right out...after its out just put the nut in a vise and take the bolt right out, then just JB weld or glue the nut back in the tank and it will hold great

[RideRaceLive93]

^^^i've never heard solution before thats really smart, usualy just expoxy the brass it seld and it will hold enough to pull the bolt out