rappin_ernie
06-19-2010, 06:39 PM
Hey everyone,
I've been messing with my carb for three weeks now, and I can't seem to get it fixed. It leaks from a hole on the inlet side at the top. Here is a picture of the hole.
http://i286.photobucket.com/albums/ll119/rappin_ernie/carb.jpg
I ordered a kit and rebuilt the whole carb, I even tested the needle valve and float, and the gas does shut off with almost no pressure. I also cleaned the needle valve seat with rubbing compound and polishing compound, yet it still overflows and leaks all over.
I've lost it with this carb, I'm about to just buy a new one all together.
Does anyone have any ideas?
Thanks!
Mike
I've been messing with my carb for three weeks now, and I can't seem to get it fixed. It leaks from a hole on the inlet side at the top. Here is a picture of the hole.
http://i286.photobucket.com/albums/ll119/rappin_ernie/carb.jpg
I ordered a kit and rebuilt the whole carb, I even tested the needle valve and float, and the gas does shut off with almost no pressure. I also cleaned the needle valve seat with rubbing compound and polishing compound, yet it still overflows and leaks all over.
I've lost it with this carb, I'm about to just buy a new one all together.
Does anyone have any ideas?
Thanks!
Mike