quick question! clutch basket nut size?

[rollie]

Anybody know what size the nut that holds the clutch basket on is? the biggest i have is a 22mm:mad: so im going to have to go get one tomorrow morning but i need to know what size, thanks!

[eastside 400]

do you have larger standard size sockets? i forget what size it is but i always just use a standard socket because my set goes larger in standard

[rollie]

i mean clutch hub ahh:mad: not having a good night, haha

my sockets only go up to 22mm and in my manual it doesnt tell me what size it is, i guess i could buy a 24mm, 26mm, and 28mm and see what one works

[Scro]

1 1/16". Don't ask me why it's standard.:p

[rollie]

Thank you!!

[DnB_racing]

I just did mine and I used a 27mm impact

[Scro]

I think they may be the same size. It's about like an 8mm and 1/4". I just know a 1 1/16" works because a 22mm was the biggest metric I had as well.

[4reeds]

27 impact. It will take it right off without having to get the clutch holder tool.

[fastredrider44]

Originally posted by Scro
I think they may be the same size. It's about like an 8mm and 1/4". I just know a 1 1/16" works because a 22mm was the biggest metric I had as well.

You mean 5/16 is the same as 8mm. Not the exact same, but close enough for all practical purposes. Same as 3/4 and 19mm, and yes, 1 1/16 and 27mm are just about the same as well.:)

[Scro]

Originally posted by fastredrider44
You mean 5/16 is the same as 8mm.

Yep, brain fart:scary:

[450R NOOB]

Is there a way to put it back on without the clutch holder? I used a broken file when I took it off which I can probaly use to put it back on but is there a better way?

[eastside 400]

if you have an old steel and fiber, put them in and then drill and rivet them together

[Scro]

I've always put a glove on, and held it with my hand. But you can stick a penny between the gears to hold it as well. The copper is softer than the gears, so it won't damage them.