400ex a-arms

[finsteratv]

can you use just the a-arms with no modifications? ive heard you need a relocater bracket. can i use my stock gear on there brakes,hub,etc

[codyarthur13]

i ahve stock 400ex on my 250x. no mods needed and yes all the spindles and everything work even the brake lines, and u only need shock relo if u want to use the 400ex shocks, stock 300ex will work fine

[smr]

Technically codyarthur13 is correct.

The shocks will bolt up but the angle is off and you will lose travel. use the 400ex schocks and a relocater.

also...You spindles will work but once again the angle is off. I recomend using the 300ex spindles on the 400ex a-arms. I put the 400ex spindles on one of Holdens 300ex's and could never get the push out of the front end....you can ask anybody at the GNCC's that have tried this...it just don't work very well.

[finsteratv]

thanks for the info guys just lookin for some mods to have fun with on the trails:D

[dns1764]

as of right now i have 400 arms and 300ex shocks (waiting on my relocator). they do fit, however i would NOT ride very far with them. there is very little travel and the front is very low.