450r carb adapter print

[Fanged03]

I saw sometime ago a print someone made if you wanted to machine an adapter piece. I thought I saved it but apparently I didn't. Anyone help me out??
Thanks,
Brent

[gt400ex]

I think you might be talking about a thread honda400ex2003 had going. You might try searching his name and see if that turns up what ya need.

[honda400ex2003]

http://www.exriders.com/vbb/showthread.php?s=&threadid=416903&perpage=10&highlight=adaptor&pagenumber=2

^^ is the dimensions and stuff

let me know if you need a better drawing, I have an image shack account i can upload it to now to make it better if needed (i think i still have it somewhere)

this is the install

http://www.exriders.com/vbb/showthread.php?s=&threadid=421133&highlight=adaptor

steve

[honda400ex2003]

you could take a bit more off the outside of the smaller OD to make the tube fit easier also if you like. otherwise you can still get it on but you have to work a bit at it. I didnt grind the tube out or anything, just took off the subframe rests on the sides of the box to get the front of the box a bit lower. this probably wasnt needed either lol. steve

[Fanged03]

Cool thanks guys. Steve what year carb is that? Are you still using the airbox?

Brent

[Fanged03]

just noticed the second link, you can scratch those questions.

Thanks

[honda400ex2003]

http://img248.imageshack.us/img248/8742/spacerspecssheet.th.png (http://img248.imageshack.us/i/spacerspecssheet.png/)


you could make the .5" for the smaller part length .75" and the OD on the smaller .0625" instead of .09" if you choose. It worked good for me just how it is though.
steve

[honda400ex2003]

I think i got everyones pms sent back to them with the sheets also. steve