bigger sprocket >>>case saver?

[pinman_87]

put a bigger front sprocket +1 and need to know if there is a case saver out there that will fit it......if not i will grind down my facotry one and try to make it work!

[aDviSol2y]

I am pretty sure there are aftermarket case savers that will work, but I would just grind your stock one down.

[honda400ex2003]

I have a pro design one that i had to grind a little bit to get it to work with the 16 but it is better than grinding the stock one. it is actually supposed to fit with the 16 without grinding so you should be ok. you would have to take off quite a bit of material to get the stock one to work.

http://www.prodesignracing.com/main.htm

steve