buster024
05-21-2010, 04:37 PM
I'm wrenching on a friends 450 that (out of the blue) won't start. I pulled the carb apart and cleaned the fuel filter, main jet, and checked the needle and clip. Everything seems to be clean and functioning correctly, but I can't get fuel to run through the carb once the tank is connected. I've checked the tank valve, and gas is flowing out of the tank. If I pump the throttle, I would assume I should get gas out of the fuel bleed line, but with the throttle open, the fuel open, and the screw all the way out, I get no gas through the bleed line.
I can't smell any gas through the exhaust, so somewhere something is plugged.....
I can't smell any gas through the exhaust, so somewhere something is plugged.....