jetting ??? for 34mm keihen

[badasprn]

please give me your suggestions for a starting point on the jets, I know the jets are numbered different between keihen and mikuni carbs. I am using a stock mikuni with a 300 main and the dyno jet needle and larger pilot. Any suggestions are appriciated thanks check sig for motor specs

[headache]

i'd say start with a 50 pilot and 155 main and go from there. I ran a similar setup a few years back and thats what i was running...

[badasprn]

THANKS FOR THE INFO I WILL TRY IT OUT AND LET YOU KNOW HOW IT IS