Yes another jetting thread

[MarvOhio]

ok so im just about finished with my winter rebuild and here is what i have done motor wise.
- K&N filter with airbox lid removed
- White bros R4 slip on with stock head pipe with welds ground
-416 kit with weisco 10:1 comp
-stage 2 hotcam

After reading all the other jetting posts. I was thinking jetting around 42 pilot and 170 main. but im not sure at all can someone help give me some insight ..thanks:D

[honda400ex2003]

sounds like a good start to me. I would go with the 42, 2.5 turns out on the f/a, 2nd needle position and the 170. you should be good with that. That is pretty much the same setup i ran with my stock carb. steve

[MarvOhio]

thanks honda400ex2003