stem help

[mdh23jr]

im putting my quad back together and dont know exactly what bushings and what not go back into my steering stem.. i bought this kit on ebay for it.

http://cgi.ebay.com/ebaymotors/STEERING-STEM-BEARING-SEALS-HONDA-TRX250R-250R-86-87-/330320595023?cmd=ViewItem&pt=Motors_ATV_Parts_Accessories&hash=item4ce8a4484f

plus i have the circlip that goes in there. but is there something else that goes in there. also i dont know which way or place the bushings go anyone have some input. i need some info asap if you could. thnks.

[250rPRIDE]

bearing goes in from the top, tip put it in the freezer for a day then tap it in with a socket just about the same outside diameter. but then put in the clip and larger seal, bottom seal is the smaller one and then a bushing rides in it... put your stem in, might have to make sure your bushings stays in there, tighen it down install cotter pin