PDA

View Full Version : axle hubs ?


o4twinpeaks
05-03-2010, 06:15 PM
Are there any hubs that will interchange with the stock eton axle? 4/110 pattern.
Was looking at doing an extended hub. I thought I read in a post somewhere that honda hubs had the same splines but haven't been able to locate it through the search.

Tom
#404's Dad
05-03-2010, 06:57 PM
Honda hubs will fit the larger spline Apex axle not the smaller DRR style axle.
Logan #34's Dad
05-04-2010, 04:00 AM
I got one Honda hub if you want it. You pay shipping and its yours.
tyler70t
05-04-2010, 10:20 AM
When our hubs on our Apex went we put some Cobra hubs on , got them from Wiley Mods......Jeff
o4twinpeaks
05-04-2010, 01:24 PM
I need to just need to find out if the splines are the same. We just picked up a kfx700 and I know the splines on that are the same so tomorrow night I will pull one off that and see if it fits or is too large. I will take that 1 honda hub. Just pm me your paypal addy and I'll send it when I get home tomorrow. Out on the road now so liiving off the phone lol.
marsrace2
05-04-2010, 01:58 PM
Originally posted by #8trx450r
Honda hubs will fit the larger spline Apex axle not the smaller DRR style axle.

our stock Apex Axle uses Yamaha Splined Hubs.
#404's Dad
05-04-2010, 02:16 PM
Originally posted by marsrace2
our stock Apex Axle uses Yamaha Splined Hubs.

Ours uses Honda lol, Both will work just fine just depends on what bolt pattern you want to have and the Honda is far more popular with almost all bikes being 4x110 vs the Yamaha only 4x115.
marsrace2
05-04-2010, 02:31 PM
haha my Yamaha Hubs have a Honda Bolt pattern.....lol
#404's Dad
05-04-2010, 02:40 PM
Originally posted by marsrace2
haha my Yamaha Hubs have a Honda Bolt pattern.....lol

Well you da man I suppose then ;)
greenmachine70
05-04-2010, 02:54 PM
do any other hubs fit the drr axle? I need longer wheel studs for some wheels I bought that have the centering inserts.
Thanks
#404's Dad
05-04-2010, 03:06 PM
Originally posted by greenmachine70
do any other hubs fit the drr axle? I need longer wheel studs for some wheels I bought that have the centering inserts.
Thanks

Not that I know of, I had to replace the studs in all of ours to be able to use the new Douglas Jr. wheels due to them being 3 layers thick in the center vs the normal 2 layers.

I am making some aluminum rear hubs right now for my son's bikes though, we'll see how that pans out later lol.