need help heim setup on arms

[jimmyjam400ex]

how do i setup my a arms i just got new heims for the a arms i bought a couple months ago so i really wanna put them on but i have no idea how to set them up and how far to thread themm in and how the camber and caster work i saw the lonestar directions and cant quite figure it out can any of u guys help me out and tell me how to set these up the right way
thanks jimmy

[jimmyjam400ex]

i really wanna get these on they have heims at all the mounting points at least give me some where good to start
thanks jimmy

[lester985]

what kind of a arms are they

[jimmyjam400ex]

theyre full flights or bugards i think never actually found out but heres a pic i found on here that i belive is the one of the previous owners if not the look xactly like that the have heims at all 4 mounting points on each side

[brewster426]

i screwed them all the way in, and the ones on the bottom of the nuckle, the lower a arm heim, i screwed out 3 turns on each side, which put a little camber in it to turn better. but make sure you use locktite on everything, and dont be scared to use alot of it.

[lester985]

Originally posted by brewster426
i screwed them all the way in, and the ones on the bottom of the nuckle, the lower a arm heim, i screwed out 3 turns on each side, which put a little camber in it to turn better. but make sure you use locktite on everything, and dont be scared to use alot of it. x2 what he said

[gtt416ex]

those would be American Star Racing a-arms.

[lester985]

Originally posted by gtt416ex
those would be American Star Racing a-arms. yes u are right im a dumb *** to think they are ffr arms

[jimmyjam400ex]

do u mean to thread the ball joint attached to the spindle 3 turns or the heims where the mount to the frame
also is locktite that nessesary theres no way they could move or back out unless the bolts were taken out or the spindle
im still gonna use it anyway i was just wondering

[brewster426]

the heim in the lower control arm...where it goes to the knuckle. i turned mine out 3 turens and all the others are all the way in.

[jimmyjam400ex]

ok thanks im gonna be putting them on tomorrow i put my extended hubs on about an hour ago i cant wait to get the arms on they should be nice with my 450r shocks