310 Pro X 6 mil cant wait!

[atv fan 28]

Got my motor today! i still need to get a pipe and get it all dialed in, but i cant wait to show them 450 guys whats up! lol Ive heard that Neil@ C-Leigh can build a motor, i hope its true!

[Saleenster]

Originally posted by atv fan 28
Got my motor from lilguy450 today! i still need to get a pipe and get it all dialed in, but i cant wait to show them 450 guys whats up! lol

Thats funny...bet your excited. Hope it runs good for ya

[C41Xracer]

neil can build a strong motor, i had a 295 done by him a few years ago and walked 450's bad

[zedicus00]

neil can make a stock bore 250 pull on a 450. that thing should be a rocket ship.

[rablack21]

Does C-Leigh have a website?
If not what is the contact info?

[C41Xracer]

No website. If you want to get a hold of him go to the "other" R site and PM him

[86 Quad R]

yea or pm him here. he can build some strong sum beeches for sure. :D and is very reasonable. :cool:

atv fan 28 congrats on ur engine. it should rip ut wrists outta socket when ya get it all dialed in en get it to the sand? need help gimme a holler. :cool:

[atv fan 28]

Originally posted by Saleenster
Thats funny...bet your excited. Hope it runs good for ya Excited aint the word!

[atv fan 28]

Just a little update for you guys. Found out after i got the motor someone had ran it a little dirty. Tim@Titan Racing http://www.titanracinginc.com/ has it now. Come to find out also, the piston was barely hitting the head. Tim is going to relieve the head just a bit. He is also in the process of installing a new piston so i can get rid of the spacer plate. After he is done with it, he assures me it will be even a hotter little motor!! Talkin with Tim about motor setups makes me feel a little dumb, i guess you could say! He knows his stuff! Maybe the next update will be some videos of me spanking them 4-strokes!!!

[86 Quad R]

i knew he'd get you pointed in the right direction with it. arent you glad i sugeested you carry it too him as i didnt have a warm and fuzzy with what i saw. should be an arm rpper for sure.

any idea as to when your getting it back? lol because i have a couple cylinders that i dropped of that are in line, behind yours. :D

[atv fan 28]

Yeah im glad i took it down there. When i get it back, i will know its ready to go for sure! Tim says he is getting caught up on work, so hopefully i will get it back in the next couple weeks. :rolleyes:

[1promodfan]

I've seen that motor run in person, and let me tell ya, thats one strong running beast!!;) You're gonna be real happy with it.

[C-LEIGH RACING]

Randy,
You gona talk to Tim any time soon.
Sounds like somebody been in that engine for sure & left out a gasket or something, cause it should have had right at 0.040 squish on the head.

You can build an engine, but once it leaves, you got no control after that unless its riding in your trailer.
Neil

[86 Quad R]

more than likely talk to him this friday. i've got a couple things i need to check on and i'll talk to him about the engine. i agree, ya never know what the next feller has in store once an engine leaves the shop. theres just no telling as its changed hands atleast three times since the build.

i'm curious to know myself as i didnt have a warn n fuzzy and something didnt seem right when wayne brought it by.

[atv fan 28]

Went and picked up my swingarm from Deaf Man Chassis today. Chris done an awesome job on it!

Still waiting on my motor from Tim. It should be done next week.

Neil:

On this 310R x +6 mil stroker, how is it set up?

Does the piston uncover the exhaust port at TDC?

How thick is the spacer plate?

Does the piston come below the bottom of the exhaust port at BDC?

How much does the piston stick out the top of the sleeve/cylinder at TDC?

What kind of timing does the transfers & exhaust have?

Standard Honda-Wiseco-Pro-X piston?

Standard Honda rod? Short or Long?

Having one built very similar, curious as how you put this one together...

Thanks neil ahead of time for all your help!

C.

[dwest86r]

Man that swingarm looks awesome! Is it stock length or extended?

[atv fan 28]

Originally posted by dwest86r
Man that swingarm looks awesome! Is it stock length or extended?
Its a plus 4. Deaf Man Chassis in Florence built it. Im really happy with it!:macho

[dwest86r]

Man i never heard of them. I didnt realize we had so many shops around here. Looks like you're well on your way to having one mean bike. I've just now got the clear coat on my frame and working on painting a-arms. Are you thinkin bout draggin your bike a lil bit?

[atv fan 28]

Im building it just to play around on. But yeah they are people really close that does everything. Tim at Titan does awesome motor work. Deaf Man does chassis and Combs does powdercoating. They all live within miles of each other. Im going to have Combs PC my swinger. From what i heard he does really good work.

http://www.combscustomcoating.com/combscustomcoating/Photos/Photos.html

[86 Quad R]

Originally posted by atv fan 28
Im building it just to play around on. But yeah they are people really close that does everything. Tim at Titan does awesome motor work. Deaf Man does chassis and Combs does powdercoating. They all live within miles of each other. Im going to have Combs PC my swinger. From what i heard he does really good work.

http://www.combscustomcoating.com/combscustomcoating/Photos/Photos.html

yes he does really good work. i've had him powder engine cases and a frame or two. very pleased with his work. :cool:

[dwest86r]

Appreciate it guys. I've got plans to take my motor to tim....just a few more bills! lol Yall know how it is. I've actually been kickin around the idea of a different swinger so its nice to know somebody is so close. Good info.

[atv fan 28]

I love it when the UPS truck stops at my house.

I got my new pipe. It should work very well with my motor.:cool:

[86 Quad R]

hahaha i hear ya. that is outright sexy there http://forums.everything2stroke.com/images/smilies/Drool.gif ............ any word on the beastee power plant? :devil:

[atv fan 28]

I talked with Tim 2day. He got the piston yesterday and should have it back together by Friday. Its been a long wait.:ermm:

[86 Quad R]

good deal...... but be well worth it tho. http://forums.everything2stroke.com/images/smilies/Yay.gif

[1promodfan]

I didn't know you was going with a TRX-11. Thats a huge pipe!!

[atv fan 28]

Yeah i call it my "Pregnant Pipe" LOL Its pretty big.:macho

[woodsracer144]

please dyno that beast some time! what is the bore at?

[1promodfan]

Wayne, here is a video link of that motor running that you bought.:D

http://www.youtube.com/watch?v=qBsTVesTZaA

http://www.youtube.com/watch?v=xvGf1XOWdEQ

[dwest86r]

Just let me know if you need help riding this thing when you get it together! lol

[atv fan 28]

Originally posted by 1promodfan
Wayne, here is a video link of that motor running that you bought.:D

http://www.youtube.com/watch?v=qBsTVesTZaA

http://www.youtube.com/watch?v=xvGf1XOWdEQ
Yeah ive watched them videos a couple times. :devil: I commented on one of them i think.

And woodsracer the bore is 73 making it a 326cc.

[atv fan 28]

Originally posted by dwest86r
Just let me know if you need help riding this thing when you get it together! lol LOL! I think i should be OK!

[1promodfan]

Here is a pic of the 250R that Shane had. He now has a Saber motor is a drag frame.

http://i155.photobucket.com/albums/s291/1promodfan/ATV%20photos/PicturesfromJustinscamera077.jpg

[86 Quad R]

is that the one that yfzb feller over at the other site had?

[1promodfan]

Originally posted by 86 Quad R
is that the one that yfzb feller over at the other site had?

Yep thats the one..........thats the motor that Wayne now has.

[86 Quad R]

ahhh i remember. kewlness!

[atv fan 28]

Made a little progress today on the R! Got the motor in and the swingarm installed. Would have gotten the axle done but somehow i lost the snap ring for the brake stay,:confused: Hoping to finish it up next weekend.

[atv fan 28]

One more.

[1promodfan]

She's looking really good Wayne. You're gonna love that motor when you finally get to ride it.

[86 Quad R]

starting to look really goed wayne. that swing arm combo is nicer after seeing one of them actually mounted.

btw: sent you a pm on that carrier cir-clip.

[atv fan 28]

Got my pipe mocked up. I heard some people had a hard time getting their 11s to fit right. But mine fell right into place. I just had to do a little fender trimming.

[1promodfan]

Bro that is one beast of a pipe!!!:D

Very Nice...looks awesome!

[C-LEIGH RACING]

Give you a little tip because of that TRX11 pipe,
alway have on a mx boot when cranking & make sure your foot is placed right on the kicker each & every time you go to kick it.
Ol TRX11, 245 lbs of compression in a 350 & tennis shoes turned me into gimp a few weeks after the kicker kicked back. Crutches aint no fun.
Neil :(

[atv fan 28]

Originally posted by C-LEIGH RACING
Give you a little tip because of that TRX11 pipe,
alway have on a mx boot when cranking & make sure your foot is placed right on the kicker each & every time you go to kick it.
Ol TRX11, 245 lbs of compression in a 350 & tennis shoes turned me into gimp a few weeks after the kicker kicked back. Crutches aint no fun.
Neil :(

So what you are saying is dont try to start it with my K-Swiss on?:huh I might be in trouble!

[C-LEIGH RACING]

Originally posted by atv fan 28
So what you are saying is dont try to start it with my K-Swiss on?:huh I might be in trouble!

Tennis shoe got me along with how I was holding my foot on the kicker.
That TRX11 is so big, you got to turn your foot to the side just a bit on the kicker to keep from scratching the chrome, so you dont have a good grip or cant get a good stab at the kicker because you use the front of your foot.
Neil

[atv fan 28]

I finally got it fired up. Still have a few things to do before i can see how she runs, chain,brakes, etc. Of course had problems with the air box eliminator. I might have to try a cr boot or a UPP one. But i think she turned out looking pretty good.

[1promodfan]

Wayne, that thing looks sweet bro!! You did a nice job with it. A nice video of you ripping it up would be awesome.

[atv fan 28]

Originally posted by 1promodfan
Wayne, that thing looks sweet bro!! You did a nice job with it. A nice video of you ripping it up would be awesome.
Thanks man! Im anxious to get it out in the sand and see how she does. I will definately post some vids when i get it all dialed in right.

[C-LEIGH RACING]

That thang looks mean, now if you just had the Nac's seat cover to go with those grafic's.
Break it in good, take your time.
Neil

[atv fan 28]

Originally posted by C-LEIGH RACING
That thang looks mean, now if you just had the Nac's seat cover to go with those grafic's.
Break it in good, take your time.
Neil

I actually thought about taking the stickers off, but wasnt for sure if it would look good. The seat cover thats on it now was a lucky find. There is a atv salvage yard about 45 miles from my house that i decided to pay a visit to one day just to see what they had. Well in their main office they had that seat, which had a brand new seat pan,foam, and cover. They didnt have a clue what it fit, but i knew exactly what it did.;) So since they didnt know , they let me have the complete seat for 60 bucks. Which i thought was pretty good deal.:blah:

[atv fan 28]

Well you was right Neil. After the kicker slapped my chin a few times, i learned you better have the ball of your foot on the kicker good!:mad: I did manage to get it started with my K-Swiss on.:D It might be a little rich but for break-in i suppose it will be alright. My brand new ESR silencer is leaking pretty good. It appears to be leaking around both ends of the canister and even out the rivets.

For right now my jetting with my 39PWK which has been bored, i think to 40.5, is 185 main, 60 pilot, 2 turns out on the screw. Am i in the ball park? I still havent rode it yet, but just wanna be pretty close when i do.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/oA9ZDrG1EEk?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oA9ZDrG1EEk?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

Very nice; should be a screamer! :)

[gandgracing]

That 185 main might be close but I would say the 60 pilot is to big. Mine was around a 50 or 52.

[C-LEIGH RACING]

Nice ring in the pipe, like its suppose to, be ready to ride.
I'll second that pilot jet to big but for right now ok.
Neil

[atv fan 28]

Someone forgot to tighten up the sprocket bolt! Luckily no case damage, but will need a new slider and swingarm bushing.:mad:

[89trx250r]

she sounds lovely and i think weve all taken a kicker to the shin haha its part of the 250r experience :) And also i got a fresh esr two months ago and it leaks like no other pipe ive ever seen the whole "stinger" silencer whatever its called is coated in oil whenever im done riding and i dont even run rich so idk if its crappy design or what but im bummed about it makes such a mess :(

[atv fan 28]

Originally posted by 89trx250r
she sounds lovely and i think weve all taken a kicker to the shin haha its part of the 250r experience :) And also i got a fresh esr two months ago and it leaks like no other pipe ive ever seen the whole "stinger" silencer whatever its called is coated in oil whenever im done riding and i dont even run rich so idk if its crappy design or what but im bummed about it makes such a mess :(
I finally took my silencer and filled the rivet holes, and both ends of the canister at the joints with some silicone. I put a bead around the joint and wiped off the excess. It stopped the leaks completely.

[89trx250r]

sweet thanks man ill have to give that a shot :)

[jcs003]

Originally posted by atv fan 28
I finally took my silencer and filled the rivet holes, and both ends of the canister at the joints with some silicone. I put a bead around the joint and wiped off the excess. It stopped the leaks completely.

nice. thats what i was going to do with mine but i have been procrastinating.

[atv fan 28]

Got my new CR ignition today. What is the proper way to install it? What i mean is, how do i set the timing on it? Any help would be greatly appreciated.

I hope this ignition lives up to its hype! :macho


http://i55.tinypic.com/ouxjzp.jpg

[1promodfan]

Originally posted by atv fan 28
Got my new CR ignition today. What is the proper way to install it? What i mean is, how do i set the timing on it? Any help would be greatly appreciated.

I hope this ignition lives up to its hype! :macho


You really don't want to try to set the timing. You are already going to be advanced. Just make sure that adapter plate is turned as far counter-clockwise as it can go. I believe with this ignition, you're gonna be around 6-8* advanced ( I can't remember for sure)

And believe me, its gonna live up to its hype!!! Especially with that motor!!:D

[Pumashine]

Originally posted by 1promodfan
You really don't want to try to set the timing.

Agreed, ESR has already set the timing. Only a few courageous guys drill out the pop rivets and change the timing.