hjsmith00843
04-26-2010, 10:29 AM
Ok to get more compression I was told to do this.
Just use high temp RTV on the bottom of the cylinder.
Take the head gasket and just use the top layer by drilling out the rivit and taking it apart. I was also told to use a high temp spraypaint on the head gasket itself using a very thin coat to help seal it.
This is along with the items I have listed below.
Will I be ok to use 93 octane gas or should I use a mixture of racing fuel and the 93. like a 60% 93 octane and a 40% 110 racing fuel.
Or should the ratios be more even to make it more consistant because it will be easier to measure out.
Just use high temp RTV on the bottom of the cylinder.
Take the head gasket and just use the top layer by drilling out the rivit and taking it apart. I was also told to use a high temp spraypaint on the head gasket itself using a very thin coat to help seal it.
This is along with the items I have listed below.
Will I be ok to use 93 octane gas or should I use a mixture of racing fuel and the 93. like a 60% 93 octane and a 40% 110 racing fuel.
Or should the ratios be more even to make it more consistant because it will be easier to measure out.