C&G here is yer springs

[Pappy]

here ya go

[Sparks425Ex]

Very Sweet. Not much diff than normal PEPs.

[TeamC&GRacer]

looking great ken, thanks

[tants]

anyone know how to get the springs off of the shock?:confused:

[TeamC&GRacer]

talk to chad from extreme motorsports

[Sparks425Ex]

You need a spring Compressor or compress them by hand. Then ya just gotta take off the bottom part of the shock.

[Sparks425Ex]

You need a spring Compressor or compress them by hand. Then ya just gotta take off the bottom part of the shock.

[kabd69667]

you can get them off with your hands...get your dad or a friend to help and they'll be off in a few minutes

[Pappy]

Originally posted by kabd69667
you can get them off with your hands...get your dad or a friend to help and they'll be off in a few minutes

yep...took me like 10 seconds a shock:p

[tants]

can someone explain in detail... :confused:

[kicker696]

yeh, samehere, i really need to get my springs pc'ed, but i have no idea how to take them off?

[Extremeracer167]

here is what ya do. There are a few ways to do it. You can either measure where your preload nuts are then back them off until the springs are really loose and pretty much just flop around on there. Then the plate that the bottom spring sat on will get loose and u just take the little snap ring off, flip the shock over and the springs and plate will fall right off. Be careful and remember where your crossovers are so that way the shocks are set exactly to how u took them apart. Or the quickest way(if you have enough weight) Just flip the shock over again, but instead of backing the preload nuts off, just simply push the spring away from the plate and take the snap ring off. This usually requires 2 ppl, but can be done with one. Its kinda hard to explain but you will understand what i mean when u get the plate loose and see the snap ring. Its kinda scary to know that the only thing that holds your sprngs on is a tiny little snap ring:D

Originally posted by Extremeracer167

Its kinda scary to know that the only thing that holds your sprngs on is a tiny little snap ring:D

Ain't that the friggen truth...:eek:

[Doibugu2]

I think I will ride with mine a few times, before I brake them to send them to Pappy to get PC'd.

[Pappy]

they ship tomarrow....you should have them tuesday:)

[Andrew400ex]

very hott color scheme,but i would've made the second spring white

[Pappy]

..,.

[Pappy]

what a b!tch:confused2

[Texan32]

Hey pappy. How well does the powder hold up to the movement of the spring. Does your powder flex well without cracking?

[Pappy]

Originally posted by Texan32
Hey pappy. How well does the powder hold up to the movement of the spring. Does your powder flex well without cracking?

all shock springs are powdercoated from the factory...elka..works..pep...stock. they seem to do fine until a rock hits them just right:p

[Sparks425Ex]

Kenny, I just knew ya could do a great job on that. I knew ya would work until it was great.