ITP Baja Rims Mud Plugs/Caps - check'm out

[troybilt]

Check these out that I designed and made. They are laser cut from smoke transparent acrylic...

I only got the fronts on there now, I wanted to make sure they were going to work before I made the rears...

http://i74.photobucket.com/albums/i260/robltc/my%20250r%20Build/DSCN0505.jpg
http://i74.photobucket.com/albums/i260/robltc/my%20250r%20Build/DSCN0502.jpg

[croat1]

very nice. how are they held in? what rims are those?

[troybilt]

Originally posted by croat1
very nice. how are they held in? what rims are those?

There is a laser cut sectioned inner ring that is fastened to the baja reinforcement ring, this also plugs the holes on the reinforcement ring from mud and debris as well. Then a single piece circle is attached to the inner rings with screw-type plastic rivets.

These are ITP Baja wheels... to my knowledge no one makes traditional mud caps for these wheels. Some of the mud caps for beadlock wheels will fit the rear rims only the 8" not 9" or 10"...

[MtnEX]

Old thread, but awesome work... would like to see more...