16mm Sunworld carb and all components

[mcwilly]

New Sunworld 16mm carb with intake boot, new throttle cable, choke assembly and new Uni dual stage air filter. All of this was installed on our DRR 50, taken for a test run down the driveway, then removed. It’s been sitting in my garage ever since.
$60 plus shipping OBO to lower 48. I have a few jets that I’ll throw in as well.
I can post pics this evening.

[mcwilly]

http://i20.photobucket.com/albums/b221/rx3732/IMG_1517.jpg

[mcwilly]

back from the dead
bump

[mcwilly]

pic
also have anadditional UNI two-stage filter to include

[mcwilly]

b-b-b-b-b-bump (saw somebody asking for one in another thread)
Shoot me an offer

[JM317]

If you don't mind me asking, how's the jetting setup for the uni filter? I have a uni for my son's Polaris 50 and I believe the carb is the same. Needle clip position, air screw, and main?

[mcwilly]

Originally posted by JM317
If you don't mind me asking, how's the jetting setup for the uni filter? I have a uni for my son's Polaris 50 and I believe the carb is the same. Needle clip position, air screw, and main?

I never got it set up/dialed in for our bike, so I cant really answer your question....sorry. Try giving Gary at G-Force a call, he can probably get you a good starting point....or start a thread here on the forums, there's lots of good info from the people on here.

[edwardsp&b]

Send me a pm with paypal info and we will make a deal. Thanks bryan

[mcwilly]

Originally posted by edwardsp&b
Send me a pm with paypal info and we will make a deal. Thanks bryan

Sorry Bryan, I never saw your reply.
Bump....