PDA

View Full Version : 250r no start



rrguy
03-28-2010, 01:20 PM
Any help with

Gas yes
Sparke yes
compression yes
timing on it seems

Was starting on first or second kick, was tuning & bogged a bit & now wont start.

wingnut548
03-28-2010, 01:34 PM
I would start out by replacing the spark plag just becouse it will fire outside the head does not mean it will fire under compression. If you were tuning you probably fouled the plug. How did you do the compression test? Make sure your air intake is clear of obstructions and that the exhaust pipe is open as well.

jamesblown97
03-28-2010, 04:06 PM
i second the sparkplug

atvmx_freak08
03-28-2010, 05:41 PM
Pipe/Intake have gotten me a few times, make sure they're both clear and free flowing. I also agree with a new plug.

woodsracer144
03-29-2010, 07:25 PM
try hitting your CDI box with a handle of a screw driver also, i've had that happen theres spark but it might not aways be enough or right or something i dont know the dea...

rrguy
04-05-2010, 09:17 AM
yeah I had swapped plugs & even went out an bought another new one.

new gas, swapped cdi swapped coil? checked stator & timing plate?

emullen
04-05-2010, 11:23 AM
have you inspected your reeds?

fearlessfred
04-05-2010, 12:44 PM
make sure u have fuel in the carb bowl some times the needle and seat can get stuck

emullen
04-05-2010, 01:05 PM
.....and don't forget the teather

woodsracer144
04-05-2010, 03:05 PM
Originally posted by emullen
.....and don't forget the teather

i've done that way too many times!

fearlessfred
04-05-2010, 03:41 PM
yea, but he said he had spark so i dont think it would be the teather

rrguy
04-21-2010, 11:34 PM
It was a sheared flywheel key

thanks all