R3Concepts
03-25-2010, 07:49 PM
Just like the title says parting out a clean, 90% original '88 bike. The frame, the cases and a few other odds and ends do not go. Building a hill bike. Can post pics of desired items. Looking for fair offers on all parts. Located in Tucson, AZ.
Plastic- White, red hood, with headlight, all uncut.- SOLD
Front calipers- 50
Front hubs- 40
Brake lines front and rear- 10
Swingarm- SOLD
Rear shock- SOLD
Linkage and dogbone- SOLD
Carrier- SOLD
Axle with sprocket hub and sprocket- SOLD
Locknut- SOLD
Brake Hub and rotor- SOLD
Rear Hubs- SOLD
Sand Shark paddles- 80
Front master cylinder- 40
Renthal bars- 20
Twist throttle with cable for 40.5 Keihin- 20
DG front bumper- 30
Aluminum chassis skid plate- 20 (rather not ship)
FMF Pipe- SOLD
Footpegs- SOLD
Radiator- 50
Front brake rotors- 40
Stem with clamps- 40
Stem to Chassis clamp- 20
A-Arms with tie rods- 80
Ohlins Front Shocks. Single rate, piggyback, preload adjustable- 200
Rear brake lever- 20
Air box with intake tube, Uni filter- 50
Stock reed cage- 10
PEP stabalizer- 40
Factory Effex gripper seat cover, black, one ride- 40
Stock red tank with cap- 50
Snorkel tube- 10
Harness with kill switch- SOLD
Dyna CDI, one ride- 50
2 coils, one with boot- 20 each
Stock cylinder clean up porting, matched to the sleeve. Needs bore, I can handle if need be. Only on first bore over. Comes with head, squish is around .045.- 100 as is
Plastic- White, red hood, with headlight, all uncut.- SOLD
Front calipers- 50
Front hubs- 40
Brake lines front and rear- 10
Swingarm- SOLD
Rear shock- SOLD
Linkage and dogbone- SOLD
Carrier- SOLD
Axle with sprocket hub and sprocket- SOLD
Locknut- SOLD
Brake Hub and rotor- SOLD
Rear Hubs- SOLD
Sand Shark paddles- 80
Front master cylinder- 40
Renthal bars- 20
Twist throttle with cable for 40.5 Keihin- 20
DG front bumper- 30
Aluminum chassis skid plate- 20 (rather not ship)
FMF Pipe- SOLD
Footpegs- SOLD
Radiator- 50
Front brake rotors- 40
Stem with clamps- 40
Stem to Chassis clamp- 20
A-Arms with tie rods- 80
Ohlins Front Shocks. Single rate, piggyback, preload adjustable- 200
Rear brake lever- 20
Air box with intake tube, Uni filter- 50
Stock reed cage- 10
PEP stabalizer- 40
Factory Effex gripper seat cover, black, one ride- 40
Stock red tank with cap- 50
Snorkel tube- 10
Harness with kill switch- SOLD
Dyna CDI, one ride- 50
2 coils, one with boot- 20 each
Stock cylinder clean up porting, matched to the sleeve. Needs bore, I can handle if need be. Only on first bore over. Comes with head, squish is around .045.- 100 as is