bean2080
03-24-2010, 12:11 PM
i was cleaning up my wireing and on the very back of the quad where the rear light and ect. runs, could someone tell me what wires need to be spliced into each other? the wire colors are black, green, brown, green with yellow stripe, green wire with silver dots, and a green wire comming out of a white plug. im about 90% positive that the black and green w/ yellow stripe, brown and the plain green one is not needed at all from what i can remember.
there was a mis understanding on what pictures could be deleted off the camera so i have no idea what goes where now. :mad:
i know some green wires need to be together and does the black need to be grounded? im not running any rear lights or anything at all, i just have it so the front light will work and the fan will run. the quad will not run now that the wires are not connected. it will start just for a split second then shut off, it also has a backfire sometimes.
i have a race this sunday and im going to a practice track later today so and help would be great.
thanks alot
there was a mis understanding on what pictures could be deleted off the camera so i have no idea what goes where now. :mad:
i know some green wires need to be together and does the black need to be grounded? im not running any rear lights or anything at all, i just have it so the front light will work and the fan will run. the quad will not run now that the wires are not connected. it will start just for a split second then shut off, it also has a backfire sometimes.
i have a race this sunday and im going to a practice track later today so and help would be great.
thanks alot