CJM
03-11-2010, 02:46 PM
I bought all new calipers and lines, mine were trashed.
1. Rear pedal feels fine and isnt spongy, but the brake seems to be dragging alot. I looked at my EBC severe duty pads compared to the stock pads the loaded caliper came with-they seem to be thicker?
2. Front seems to giving me trouble. I replaced the 3 line setup with a 2 line setup. They connect both at the master, then split tot he calipers, there is no junction anymore. I also did the calipers and pads.
I cant seem to get the air out, instructions said to:
1. Loosen banjo bolts at the calipers
2. Pump brake lever till fluid comes out. It doesnt seem to be coming out nearly as well as the rear did. It will barely trickle even if I pump. I left them open a bit hoping for a gravit bleed.
3. Said to then tighten banjo bolts down till barely loose and then pump then open bleeder nipple...
IDK wtf to do now except hope gravit bleeding will help
1. Rear pedal feels fine and isnt spongy, but the brake seems to be dragging alot. I looked at my EBC severe duty pads compared to the stock pads the loaded caliper came with-they seem to be thicker?
2. Front seems to giving me trouble. I replaced the 3 line setup with a 2 line setup. They connect both at the master, then split tot he calipers, there is no junction anymore. I also did the calipers and pads.
I cant seem to get the air out, instructions said to:
1. Loosen banjo bolts at the calipers
2. Pump brake lever till fluid comes out. It doesnt seem to be coming out nearly as well as the rear did. It will barely trickle even if I pump. I left them open a bit hoping for a gravit bleed.
3. Said to then tighten banjo bolts down till barely loose and then pump then open bleeder nipple...
IDK wtf to do now except hope gravit bleeding will help