spindle nut???

[twopump78]

400ex spindles with baldwin hubs with the dust covers... what nut should I use? it's 14mm 1.5 pitch but the stock castle nut will not allow the dust cover to fit on what is the best thing to use?

[matt250r21]

Use the 88-89 TRX250R spindle nut. It is M14x1.5 and the hex is 19mm with no flange. Fits inside the Baldwin hub cover.

[twopump78]

Thanks for the info Matt. I went to 5 hardware stores and couldn't find 14mm 1.5 pitch anywhere. So i just took the 400ex nut and ground down the washer. It works.