Best exhaust for low and mid

[337450r]

What would be a good exhaust for low and mid power

[nskukalek79]

I have a Sparks full system and it really helped out everything, lower mid and top

[Scro]

I've heard that pipes that have a tighter bend at the head will give better results on topend. Those that have more of a sweeping bend are partial to more bottom end.

In my opinion, you're not going to really tell a big difference in the range of power from one pipe to another. It may be a little different, but it won't be drastic, like say a different profile cam will do.

[RadekPL]

I'll have Jardine RT99 soon, so I'll be able to compare it to LRD Anniversary, which seems to have nice bottom. However, from my personal experiences pipes with Resonator have a lot better low/mid. They also provide ultimate throttle response that you can't beat.

[sunco]

Scro , so when I put a few dents in my 04 sparks pipe for my 07 I should have better top end, naturally it will have that tighter bend u speak of :devil:

[Scro]

Originally posted by sunco
Scro , so when I put a few dents in my 04 sparks pipe for my 07 I should have better top end, naturally it will have that tighter bend u speak of :devil:

Not necessarily:p

[sunco]

so if I do a good job then thumbs up?

Here's my ride, got it tore down, need to do the value check. waiting on houser arms & Motowoz shocks. makin it mx ready now. as u can see I love the woods

[Scro]

Originally posted by sunco
so if I do a good job then thumbs up?

Here's my ride, got it tore down, need to do the value check. waiting on houser arms & Motowoz shocks. makin it mx ready now. as u can see I love the woods

I thought you were joking.:o There's no way I would do that to a pipe.

[sunco]

Yeah, I asked around & got yeah u can do it & no you can't. I have the 04/05 pipe I just need to fine someone who has the 06+ that will switch w/ me.

[d3ktrix]

The 1 exhaust I felt made a big difference on the low vs most of the other exhausts was the old TC Shorty.

The bend for the header was way out there, perfect for burning ur boots off and making low end.
And the header it self was pretty small diameter.

Though it is a tad louder then your average pipe because it has almost no silencer.

The old nmotion shorty pipes are pretty similar too.

[sunco]

I gotta polish mine like ur's. I see u sold that in one post. Way to go. Still waiting for all my stuff. Called Houser & they said shipping this Tuesday, can't wait

[motomxman450]

I've heard that dasa has good bottom end grunt, but I have also head that the motoworks sr4 hits harder than the dasa

[leev26]

I have always had great luck with HMF pipes.

[RadekPL]

Dasa is top-end biased pipe with not much bottom end. HMF should have good torque. I'd be able to compare them all when I'll get my shocks back from revalving, cuz I had HMF too.

[Baileygunns]

Originally posted by sunco
Yeah, I asked around & got yeah u can do it & no you can't. I have the 04/05 pipe I just need to fine someone who has the 06+ that will switch w/ me.

You can get it to fit. Was it you I was talking to before about it? I just put a 06 on an 04. Minor, Minor modification.

[05specialeditio]

We switched to Terry Design Concepts right at the start of the DWT Series. It has been great! Kody has been 1st or 2nd into 1st corner almost every race. He even broke Uppermans holeshot streak! Great pipe, Dustin has also been great for support!

[05specialeditio]

Here is a Picture of the pipe.

[337450r]

That terry pipe looks great

[05specialeditio]

Here is the full system view.

[337450r]

the terry pipe how loud is it also , what does a full system terry run $$$$

[05specialeditio]

its priced around all the price of all other major brands. give dustin a call he will answer all ur questions. 661 428 7974

[sunco]

Originally posted by Baileygunns
You can get it to fit. Was it you I was talking to before about it? I just put a 06 on an 04. Minor, Minor modification.

Yes. I just haven't been in the shop to work on it lately. My other parts might come in this week.

[337450r]

Originally posted by 05specialeditio
We switched to Terry Design Concepts right at the start of the DWT Series. It has been great! Kody has been 1st or 2nd into 1st corner almost every race. He even broke Uppermans holeshot streak! Great pipe, Dustin has also been great for support!
Your right about Dustin , great guy , I am going with his exhaust , hopefully by end of next week have it installed , thanks

[RadekPL]

You need to know that top-end is most important on starts. You can have a holeshot winning package, but it won't be rideable with bick lack on bottom-end.

[Sjorge450R]

the Rossier for the 04/05 has a crazy bend in the pipe, everyone knows that. I run one and my bike is a torque monster. That an a 03 CRF cam....

http://www.youtube.com/watch?v=Y_xyD9zvph0