PDA

View Full Version : Looking for 07 up brake light plug



riotact
02-25-2010, 02:35 PM
I'm looking for an 07 up plug for the brake/tail light,and it looks like you can only get it if you buy the whole wire harness.If you have one your not using or know where you can get one let me know and I can PayPal you.Thanks!!

bigbad400
02-26-2010, 09:12 AM
450r plug. thats what i used to make a brake light on mine. uses all the same crap as a newer ex. but you can buy just the 14 inch piece your looking for. c if that helps.

riotact
02-26-2010, 11:35 AM
Cool.I didnt even think to look at the 450r.I'll go see if I can find the part number on Service Honda.Thanks for the help

riotact
02-26-2010, 12:29 PM
Originally posted by bigbad400
450r plug. thats what i used to make a brake light on mine. uses all the same crap as a newer ex. but you can buy just the 14 inch piece your looking for. c if that helps.

They dont list that as a seperate part just part of the whole harness.Do you have a part number or the place you ordered it from?

riotact
03-01-2010, 02:44 PM
Any ideas except soldering wires to the brake light itself?

3400ben
03-08-2010, 08:02 PM
Did they change them from 02 to 07?

riotact
03-09-2010, 07:29 AM
02 does not have a brake light and that is what I'm upgrading to.

mtrombla08
03-09-2010, 05:19 PM
in 05 they switched to the led which is a different plug i believe. mine was broke and i just used some crimp on wire connectors the fit the prongs in the light. then i used some jb weld to hold them in and keep it watertight.

slightlybent47
03-09-2010, 05:57 PM
Don’t solder the wires together; it will make the connections corrode.
Use the crimp on connectors only.