PDA

View Full Version : Front Brake Caliper


400exOverride
02-24-2010, 10:47 PM
my left front brake caliper locks up when lever gets pulled and doesn't release! I need brakes but it stays locked up. i can take it off and push the pistons back down but it dosen't go back in . Any help would be appreciated.
JAKE YATES
02-25-2010, 09:33 AM
i have a caliber for 50 dollars shipped...
400exOverride
02-25-2010, 10:03 AM
No i just want to repair this one.
Baileygunns
02-25-2010, 10:20 AM
A caliper rebuild kit or just take it apart and clean it. A rebuild kit can be found on ebay for about $20 bucks.
Scro
02-25-2010, 10:30 AM
It probably just needs to be taken apart and cleaned. Makes sure it is sliding easily, and grease the pins with waterproof grease before putting it back together.
matt250r21
02-25-2010, 03:20 PM
Don't use waterproof grease, use silicone grease or the rubber bushings will swell.
Scro
02-26-2010, 09:01 AM
Originally posted by matt250r21
Don't use waterproof grease, use silicone grease or the rubber bushings will swell.

I've never had a problem with waterproof grease, but I will take your advice.
miles Machine
02-27-2010, 01:06 PM
brake line could also be collapsed or tore on the inside allowing fluid to pass to the caliper but not return to the mc