typhoon 90 rear sprocket

[250rrr]

looking for a small one ....i have a stock one on there now .

anyone know where i can get one first off ??

are the same as any other quads ?

running the 155 z engine in it with a stock front 15 tooth and my little guy is ice racing it .any suggestions ??

[lem dad]

If I remember right crf50 will work you may need to drill out the bolt holes I can check but I think this is how we went to smaller
size but we also use 428 chain not 420 try rebel gears they can make any thing you want

Rowlands Motorsports

[Ride1Rob]

PM Hondo (Russ) on the site. He sales rear sprockets for the Typhoon.

[Hondo121]

let me know what size you need

[hanzito]

xr 50 sprockets bolt up. thats what i run on my sons with the built gpx 160 motor in it.

[250rrr]

DOESN;T THE XR50 HAVE A 420 CHAIN ? TYPHOON HAS A 428 CHAIN ??? THANKS,MIKE
NEED -39 OR 40 TOOTH SPROCKET 428 CHAIN

[Ride1Rob]

Seems there may be discrepancies between different Typhoons as ours had a 420 chain. We upgraded to the 428. I get our sprockets from PMP sprockets. Very light/strong aluminum setup but they run over $40. http://www.pmpsprockets.com/inc/sdetail/1574

[250rrr]

i emailed them and they never repsonded .....i will call them
would you happen to have a 39 or 40 tooth for the 428 chain you wanna part with ? thanks,mike

[Hondo121]

i have all sizes from 30 to 40 let em know.
thank you
Russ

[250rrr]

tooth ? thanks,mike