after market radiator

[smokinwrench]

Which is best, I keep seeing PWR, it seems to be the most common, is it good?

If they are all about the same I want the cheapest I can buy.

Anyone know of the cheapest place to buy one?

I would buy a nice used one also if there are any forsale.

[smokejr]

I just ordered one from raceway parts.

[Velvet-Casket]

If you search on ebay, you will pull up an oversized radiator called AFCO. They claim their radiator will keep a big bore crf,yzf hybrid/fourstroke engine cool. I know my stock engine on my yfz 450 seems to put out more heat than my 250r ever has....So i would recommend the AFCO......it will set you back $425 +shipping though....

[smokinwrench]

Only afco I found on ebay has inlet and outlet on same side

[jas250r]

they are dual pass. they work nice. used one on my 350 pv. in summer beating on it, 200 degrees

[Aceman]

Originally posted by smokinwrench
Only afco I found on ebay has inlet and outlet on same side

That's the one. Buy some heater hose and make your own coolant hoses, that's what I did. My 310 likes to run around 150 degrees or so now with Engine Ice.

[jas250r]

i got the stock hoses to fit. i think the lower is the upper, or vice versa. and switched ends. had to cut a few inchs off. but looked pretty good.

[siderbox]

I just ordered a AFCO from Janssen Racing, should be here tomorrow.
I did alot of research, that was the one I came up with.