tighten chain on 02 blaze

[TNTWARRIOR]

i am a new cdale owner got a 03 blaze the chain needs tightend how do i do that on this machine ?email at cshasipes58@yahoo.com

[jesshamner]

You need to loosen the 4 bolts on the back of the swingarm and then stick a screw driver into a hole that is located in the carrier on the right side of the quad. Then just push the quad forward or backward until the chain has the correct tension. A good rule of thumb is to be able to fit 2 fingers between the chain and the swingarm right behind the chain buffer. You need to make sure that the adjustment hole stays belows the centerline of the chain travel.

[jesshamner]

http://www.cannondaleriders.com/tech/index.shtml

This page may be useful. There is an online owners manual that shows how to adjust the chain.