PDA

View Full Version : ngk racing plug cables


jlrenken
02-11-2010, 03:09 PM
does anyone know if the racing cables from ngk are the cr1 and cr2s i cant seen to get ahold of anyone from ngk. and from some of the info i have gathered those are the to i think i need. can anyone confirm this.
thanks
Blizzard24
02-11-2010, 03:15 PM
Here ya go
hotseatpowersports (http://www.hotseatpowersports.com/NGK-Racing-Cable-Kit-for-Can-Am-DS-450-p/ngk-cankit.htm)
jlrenken
02-11-2010, 07:08 PM
i know u can get them there but i was hoping someone can answer the question that i ask. about the cr1 and cr2
Blizzard24
02-11-2010, 07:42 PM
ahhh I see where you are going with that. Cant answer that for you. keep us posted if they are though.
LTRracer4
02-11-2010, 08:46 PM
Does one kit include both cables or just one?
jlrenken
02-12-2010, 06:25 AM
both
nate450x
02-24-2010, 05:38 PM
This might be a dumb question but i was looking at the stock wires and if you get the NGK kit how do you change them. The stock wires look like they go completely inside the coil. Just curious because i was thinking about getting them!
ds450xracer
02-24-2010, 06:05 PM
Been seeing alot of people getting these, whats the point of getting these cables, i've heard they can make the bike start faster
HOBS DS450
02-24-2010, 09:27 PM
Originally posted by nate450x
This might be a dumb question but i was looking at the stock wires and if you get the NGK kit how do you change them. The stock wires look like they go completely inside the coil. Just curious because i was thinking about getting them!

It looks harder than it is. They screw in. So when you remove the old ones just pull the end off the plug then spin as if you were removing a screw/bolt. Install is reverse order. Hope this helps.
HOBS DS450
02-24-2010, 09:31 PM
Originally posted by ds450xracer
Been seeing alot of people getting these, whats the point of getting these cables, i've heard they can make the bike start faster

I replaced w/ NGK's because my stock ones got krispy.:D

From want I was told, it was one of the main reasons the race teams used them as well.
Blizzard24
02-25-2010, 08:25 AM
jlreken, did you find the correct part numbers? if so pm me or post them. thanks -Chris
Racers Dad 37
03-03-2010, 04:10 AM
CR3 is the Staight and CR4 is the 90 degree some people use 2 Staight one but I like 1 staight, 1 90 degree