View Full Version : Brake levers on ds90x
gawski
02-08-2010, 11:01 AM
The front and rear brake levers are too far away for my ten year old to reach. I have tried all the adjustments that I could think of to bring them closer to the handle bars. Am I missing something?
are there any after market levers that would help.
kris32775
02-08-2010, 02:54 PM
give gary a call at gforce they make smaller levers for the drr. they may fit the can am.
TrudeauRacing
03-15-2010, 10:51 AM
Hello
Here is the modification i have done to the levers.
I have filed the end of the handle that contacts the pistons in the reservoirs, shortened the return springs 2 mm, and i have re-adjusted the combination switch to limit the return travel.
Remove the spacer behind the brake switch. And for the right hand side i added a piece of rubber hose to limit the return on the handle (inserted in the switch hole).
A rear brake foot pedal would be welcomed.
Trudeau Racing
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.