PDA

View Full Version : 450R Sparks motor, Pipe, 05 Subframe, carb and more



Prey
02-08-2010, 07:47 AM
Please e-mail kstanka@comcast.net for pics, make offers

got an 05 450R motor, it has 20 hours on it since the last rebuild. it dropped a valve so the rebuild included

John Natalies 05 race head (1 of 5 sparks made for him)

Brand new OEM valve, retainers, springs etc

New cyclinder and piston, 485 cc with a 13:1 piston (requires use of 101 octane or higher)

New clutch and clutch basket

New Boysen water pump impeller and cover

Tranny went through, a couple gears and shift fork were replace (not sure which ones exactly)

all new bearings

comes with oil cooler

The rebuild was professionally done by Tony Kellner (Chris Borich mechanic at the time)




I also have a sparks big core pipe for 05 450R - SOLD

05 Carb - SOLD

05 subframe with prm wide grab bar, straight, no welds, no breaks

05 twin air eliminator kit

05 airbox

radiator

05 electronics (coil cdi etc)

05 +2 houser regular travel arms PC black. - SOLD

05 - 09 houser +2 Steering stem - SOLD

Denton stick stabilizer - SOLD

leagers antivibe clamp - SOLD

fasst flexx handle bars

pro design kill switch (red)

rtc quick adjust lever (Pro series) - SOLD

06 swing arm

bearing carrier (bearings have a 1 week ride on them)

+2 braided brake lines - SOLD

black laker plastics, 2 sets of red OEM

black gas tank

all brake calipers and master cyclinders

all hubs

1 seat 1 seat SOLD

1 One industried black gripper seat cover 1 seat cover sold

AC regular grab bar

pro armor bumper (for 06 and up) - SOLD swing skid and full body skid, all items are still functional but USED, the do have gouges and dents

i also have a bunch of stock parts, heel guard, foot pegs and a bunch of other stuff

If i dont have what you need listed, I have not listed everything so go ahead and ask.


Ken

Dylan227
02-08-2010, 08:39 AM
How much for the stabalizer?And the flexxs?Also rear hubs?

kouki
02-08-2010, 09:56 AM
How much for:
Houser stem with antivibe
Sparks Exhaust
05 Harness with cdi, regulator, etc
Carb

Prey
02-08-2010, 12:07 PM
Dylan, I will go 260 shipped for everything you asked.

Kouki, 550 shipped for everything you asked for minus the harness but including the coil, cdi, rectifier, condenser etc. Note that i did not list the harness, i will give it to you however note that it will need a new plug soldered for the carb (the 3 pin) and will need a new plug soldered for the rectifier

kouki
02-08-2010, 01:14 PM
Alright, how much for just the stem/antivibe, and carb?

redrider74
02-08-2010, 01:48 PM
what kind of carb and how much?

Prey
02-08-2010, 02:09 PM
55 shipped for the carb, barb comes with throttle cable, hot start cable and hot start lever, it is the oem carb for 04-05

140 shipped for the stem and antivibe clamp

kouki
02-08-2010, 03:31 PM
What color is the stem? How's the powder coat?. If all is good I'll take the carb, stem, and antivibe. Can you do $190 shipped on all then?

Oh, what size bars is the clamp for? Any pics?

859davidt
02-08-2010, 03:47 PM
How much for the motor?

Prey
02-08-2010, 03:57 PM
Originally posted by kouki
What color is the stem? How's the powder coat?. If all is good I'll take the carb, stem, and antivibe. Can you do $190 shipped on all then?

Oh, what size bars is the clamp for? Any pics?

The stem is straight and the PC is in good condition except where the stabilizer clamp connects

I will do 190 but i would like to send you pics of the stem before you commit to buy. can you email me above or PM me your email

Prey
02-08-2010, 03:59 PM
Originally posted by 859davidt
How much for the motor?

I want 1800 firm on the motor David. This is 1000 less than the rebuild alone cost

kouki
02-08-2010, 03:59 PM
My email is jtuttle4@gmail.com

polodinks
02-08-2010, 04:01 PM
450r front shocks. got a set? if so how much shipped to tallahassee fl

Prey
02-08-2010, 04:05 PM
i have a set of stock shocks (of an 06), is that what you are looking for?

Dylan227
02-08-2010, 04:47 PM
How much for just the stabalizer?

bluerid
02-08-2010, 04:51 PM
How much for those houser arms? And can you post some pics? Thanks.

Prey
02-08-2010, 07:34 PM
on the stabilizer, ,it is a noss and not a denton (same thing, different sticker), 30 shipped

on the arms, 220 shipped. I will have pics up tomorrow

polodinks
02-08-2010, 08:14 PM
Originally posted by Prey
i have a set of stock shocks (of an 06), is that what you are looking for?

if they are stock shocks off a 450r then yes thats what im looking for.... if so how much?

Prey
02-08-2010, 08:50 PM
150 shipped for the shocks

Denko450R
02-08-2010, 11:41 PM
interested in the RTC lever. What is a price on that?

Prey
02-09-2010, 07:22 AM
25 shipped on the lever, i will also give you whatever spare parts I have for it, think I have spare quick adjust and a perch or lever.

This is the $120 version they used to make that had 2 holes drilled to accept the clutch cable, 1 provided easy/short throw, the other hole provides a stiffer long pull on the clutch

bcapien
02-09-2010, 05:06 PM
how much for handle bars?? What size?? I can pay with paypal tonight.. Please email me photos to bcapien@neo.rr.com or send them to my phone at 330-338-9846

jason_david1
02-09-2010, 05:52 PM
can you just post prices of the stuff you have for sale on the first page

kouki
02-10-2010, 09:18 AM
Payment sent for the stem, clamp, stabilizer, and carb. Thanks alot!

Prey
02-10-2010, 09:44 AM
i apologize to those who have bought that i did not communicate it on this forum.

Nothing will ship from my area until tuesday. If you have seen the news lately DC is under siege by snow, some of the most severe storms in DCs history.

The city and surrounding areas are crippled and federal gov't / services are shut down.

Prey
02-10-2010, 09:48 AM
Originally posted by jason_david1
can you just post prices of the stuff you have for sale on the first page

I specifically did not put prices so people could make offers, i am flexible on the pricing except the motor and will consider and reasonable offer.

RallySoob
02-10-2010, 09:54 AM
PM sent on A-arms. Can I get a price and a pic? And how soon can you ship them? call me on my cell if its after 5pm pst. Thanks

Sam

Prey
02-10-2010, 10:39 AM
pics of the a-arms, I cannot ship until tuesday

http://i27.photobucket.com/albums/c156/kstanka/2010-02-10122234.jpg
http://i27.photobucket.com/albums/c156/kstanka/2010-02-10122513.jpg
http://i27.photobucket.com/albums/c156/kstanka/2010-02-10122524.jpg
http://i27.photobucket.com/albums/c156/kstanka/2010-02-10122216.jpg

Prey
02-10-2010, 10:40 AM
Originally posted by bcapien
how much for handle bars?? What size?? I can pay with paypal tonight.. Please email me photos to bcapien@neo.rr.com or send them to my phone at 330-338-9846

they are 1 1/8th, i do not know what bend they are. 220 shipped

jason_david1
02-10-2010, 12:12 PM
can you post a pic of the pro armour front bumper and how much you are looking to get for it. thanks

RallySoob
02-10-2010, 12:20 PM
I will take the A-arms. Please send payment info to me. I emailed you too.

Thanks

Sam

Prey
02-10-2010, 02:10 PM
pics of the flexx bars, the blue elastimers will be removed along with the cycra bark busters. I will provide the red and yellow elastimers and the oury grips with them. The blues elastimers are something separate i bought and do not come with flex bars when they are new.

http://i27.photobucket.com/albums/c156/kstanka/2010-02-10155829.jpg
http://i27.photobucket.com/albums/c156/kstanka/2010-02-10155855.jpg

Prey
02-10-2010, 02:21 PM
The bumper, notice the dent at the bottom center. 20 bucks plus shipping would work

http://i27.photobucket.com/albums/c156/kstanka/2010-02-10161344.jpg

Denko450R
02-10-2010, 11:23 PM
pm sent

RallySoob
02-11-2010, 01:18 PM
For A-arms: 180 of the 220 sent via paypal today. will send the other 40 first thing tomorrow morning. Let me know if you have any problems shipping out on tuesday the 16th...

Thanks

Sam

Prey
02-14-2010, 11:13 AM
just want to make sure i have everyone covered for the tuesday shipping.

Jesse - Steering Stem, anti-vibe clamp, Carb, Steering Stablizer and seat.

Sam - houser a-arms

John - airbox

Jason - Bumper

Jake - Brake Lines

If i missed anything or got anything wrong please let me know.

Ken

kawasaki1
02-14-2010, 12:01 PM
iam the one who bought the air box how much for the flex bars alone

Prey
02-14-2010, 12:42 PM
i was asking 220 but i saw someone with a used set for 200 so i will do 190.

Ken

kouki
02-14-2010, 02:51 PM
Hey, what's the carrier, just stock with new bearings or is it a billet carrier?

Prey
02-15-2010, 07:31 PM
stock carrier with almost new bearings

Redrider99
02-16-2010, 09:24 AM
How much for the gripper seat cover? Any pics?

Thanks
Tyler

Prey
02-16-2010, 03:55 PM
Tyler 35 shipped on the seat cover. It is brand new still in the box. I will take a pic anyway if you want.


everything except the clutch lever and Brake lines shipped. Waiting on payment for the clutch lever and the payment for the brake lines is supposed to clear tomorrow or the next day. I will ship as soon as it does and provide the tracking number.

Ken

liljhall09
02-16-2010, 06:55 PM
how much for the head ?

Redrider99
02-17-2010, 02:05 PM
pmed

Redrider99
02-18-2010, 06:18 PM
Paypal ready once I get ur address

Prey
02-20-2010, 07:09 AM
red, sent you a PM

liljhall09, i would rather not part out the motor.

Chesters300ex
02-22-2010, 11:50 AM
How much for the subframe shipped to 18053?

Prey
03-01-2010, 04:45 AM
100 shipped for the subframe. It will come with everything except the rubber grommets for the seat.

jersey flip
03-01-2010, 06:53 PM
if you still have the sub frame ill take it (how much to nj)

Prey
03-01-2010, 07:37 PM
i still have it, cant ship til monday though, i will be on business travel until then

if you can wait that long then cool.

TJ Bradley
03-02-2010, 02:34 PM
How much for the Flexx's and the radiator? Plastics? Do you have a chain you would sell? and just out of curiosity how much for the complete motor? Thanks, TJ

ltothaj1
03-04-2010, 04:17 PM
your PM box is full

Prey
03-06-2010, 06:37 PM
just for back from Japan. I cleared my inbox

190 for the flexx bars
40 for the radiator

and which set of plastics? if you are talking about the lakers, 100 and they come with 2 hoods, 1 is carbon fiber

03-07-2010, 01:43 PM
stock front bumper? pm me thanks

the Z Man
03-31-2010, 08:15 PM
Would this motor be more for tt mx or xc, also interested in the Lakers Plastics..

Prey
07-20-2010, 05:42 AM
sorr i have been out of the loop for a while.

If still interested, the motor has john natalie's head from 05 when he was still sposnored by sparks. It also has a 485 cylinder on it, I would say it would be more targeted for MX but the cylinder would proclude you from running prodution rules classes, in its current state it would be open class only.

I used it for woods racing though (Where production cc limit is 485), its definatey not the motor for tight/technical racing like the stomp but really shines at the more open courses like unadilla and the ironman.