jimmyjames1700
02-07-2010, 09:41 AM
Hey everyone. I have a Quad Tech KMS seat kit for a KFX450R that I am selling. It is the +1 Foam with an all Black Cover. It has been used for a couple of years so it has some wear and tear but I have posted several pictures so you can see exactly what you condition it is in.
It was originally installed by an upholster and removed from the seat pan by an upholster so that I could be sure that it will be able to be installed correctly again. I think mine charges only $25 dollars for installation.
I would like to get $75 plus shipping for it but I will consider an reasonable offer. I am only selling it because I want to get a green seat kit and I am thinking about trying out the hump seat kit. Check the pictures below for a couple of comments I have posted.
Feel free to reply or pm me about it if you have any questions at all. Thanks alot guys.
http://img708.imageshack.us/img708/594/dsc00804o.jpg
http://img686.imageshack.us/img686/5199/dsc00805i.jpg
-The foam and cover are in good condition with no tears or anything like that and the discoloring of the underside of the foam is from a light adhesive to hold it to the pan during installation and also from moisture build up which I would image is normal for a couple of years of normal use.
http://img297.imageshack.us/img297/311/dsc00806f.jpg
- This picture above was to show that before it was removed there were a couple of wrinkles I could feel under the cover with my hands but were only barely visible to the eye. The upholster told me that any decent upholster should also be able to minimize any wrinkles like that during reinstall.
http://img210.imageshack.us/img210/1953/dsc00809r.jpg
-This picture was to show the only real visible were and tear of the cover. They are all on the bottom side and are hidden with the seat in place. My upholster said that the small rip can be easily repaired with instant vinyl and he wouldn't charge my anything to do it if he reinstalled for me.
It was originally installed by an upholster and removed from the seat pan by an upholster so that I could be sure that it will be able to be installed correctly again. I think mine charges only $25 dollars for installation.
I would like to get $75 plus shipping for it but I will consider an reasonable offer. I am only selling it because I want to get a green seat kit and I am thinking about trying out the hump seat kit. Check the pictures below for a couple of comments I have posted.
Feel free to reply or pm me about it if you have any questions at all. Thanks alot guys.
http://img708.imageshack.us/img708/594/dsc00804o.jpg
http://img686.imageshack.us/img686/5199/dsc00805i.jpg
-The foam and cover are in good condition with no tears or anything like that and the discoloring of the underside of the foam is from a light adhesive to hold it to the pan during installation and also from moisture build up which I would image is normal for a couple of years of normal use.
http://img297.imageshack.us/img297/311/dsc00806f.jpg
- This picture above was to show that before it was removed there were a couple of wrinkles I could feel under the cover with my hands but were only barely visible to the eye. The upholster told me that any decent upholster should also be able to minimize any wrinkles like that during reinstall.
http://img210.imageshack.us/img210/1953/dsc00809r.jpg
-This picture was to show the only real visible were and tear of the cover. They are all on the bottom side and are hidden with the seat in place. My upholster said that the small rip can be easily repaired with instant vinyl and he wouldn't charge my anything to do it if he reinstalled for me.