450R Sprocket Guard and Rotor Guard

[countypark]

I have some brand new steel sprocket guards and billet aluminum brake stay rotor guards for sale.

They fit the Honda 450R's

The sprocket guard will fit any 300EX 400EX or 450R.

$125 shipped for the set.

or

$45 shipped for the Sprocket Guard Hardware included.

$85 shipped for the brake stay

[countypark]

Other Side

[superduty450]

You need to Put something under the rotor!! A Jagged rock can still take the rotor out!!!! TREE BANGER

[Smoker]

The same could be said about sprocket guards yet people use them every race and have become the replacement for skid plates.

[countypark]

We have over two years of GNCC Racing on this set-up. No problems with bent rotors at all.

[racer 557]

will this work witth stock swinger??

[Simon MX49]

does the brake side fit a JB swingarm?

[countypark]

If a stock brake stay fits then this will also. Its the same design as the stock it just has the extra material added for rotor protection.

Yes it fits stock swing arms as well.

[quadman21]

What Material is the Sprocket Guard mad of?

[countypark]

Steel that is powder coated.

[Simon MX49]

Do you still have them? And do you take paypal?

[Simon MX49]

mailbox is full, couldnt send pm back

[racer 557]

Sold!!

[countypark]

I have another set for sale.

[Simon MX49]

That sets mine. I emailed you about it, I'll pay when I get off work

[countypark]

I have yours ready to ship.

I have another set and I am making more.

Tom

[want2bfast]

I will take a set.. Please pm me...

[EMX5636]

I'm next in line for a set. PM me when you get them done. Paypal ready. Thanks!

[want2bfast]

Money Sent..

[countypark]

Originally posted by want2bfast
Money Sent..

Will send out tomorrow.

[want2bfast]

You have a tracking number?

[racer 557]

just received mine today good job!!

[countypark]

Originally posted by racer 557
just received mine today good job!!

Thanks,

I am out of sprocket guards for now but I still have some brake stays.

[racer 557]

well i got both and they seem like a good product but i will not be able to get these on my quad for a couple weeks its to cold out and my garage is like being outside

[racer 557]

do you make these for any other quads i have freind that might be interested in a set if you make them for a yfz

[countypark]

Originally posted by racer 557
do you make these for any other quads i have freind that might be interested in a set if you make them for a yfz

I don't have them yet but I will. They will cost a little more due to the thickness of the billet.

[racer 557]

ok well PM me with some pics and prices and ill let my friend know

[countypark]

AS soon as I get them I'll put pics on. I don't have a date though.

[want2bfast]

Got mine.. Just a quick question.. Why didnt you make both pieces out of aluminum?

[racer 557]

steel is stronger.....

and hey should i run a chain guide or should i be fine i notice you dont have one in the pic

[want2bfast]

Originally posted by racer 557
steel is stronger.....

and hey should i run a chain guide or should i be fine i notice you dont have one in the pic

So why didnt he make them both out of steel then...

[racer 557]

The one is billet and it's thicker( the brake stay)
I raced go karts before and we ran aluminom sprocket guards and we had to get a new one every week just about

[kaw45026]

Do you make these your self i like the brake stay protector in one piece.

[countypark]

Originally posted by kaw45026
Do you make these your self i like the brake stay protector in one piece.

I have a friend who has them made.

[countypark]

Originally posted by racer 557
steel is stronger.....

and hey should i run a chain guide or should i be fine i notice you dont have one in the pic

The chain guide is up to you. On my Stock swingarm I had to modify the plastic chain guard.

[EMX5636]

PM me your Paypal. Would like to get just the rotor guard off you since you are out of the sprocket ones. Thanks!

[Simon MX49]

Just leavin some feedback... This set up is awesome. Shipping was fast, and product is great. I'll post some pics up once I get the quad completely done of mine with it

[EMX5636]

Paypal for a complete set sent! Thanks

[countypark]

Originally posted by EMX5636
Paypal for a complete set sent! Thanks

Your set will ship tomorrow.

I have one set left.

[EMX5636]

Got mine in the mail. Looks great! can't wait to get them on. Thanks!

[countypark]

Still have one more set to sell.

[gator_1234]

where do u get longer sprocket bolts . mine are too short ,

[tdycus]

Originally posted by gator_1234
where do u get longer sprocket bolts . mine are too short ,
yea x2

[countypark]

I still have one more set for sale!

[rideredxc]

I've been using these since 2006 on my 250x then 400ex with no problems. I won Sport class in 2007 with one and Gary Parmerter won 30+C in 2008 with one, just incase anyone doubted if they would hold up. They seem to be able to take some pretty good hits . even survived the wisp.

as far as thinking it should go under the rotor: the whole point is to have less surface to get hung up on. i can't count how many times over the years i've made passes by taking the crapier line and blowing right through it.

[Simon MX49]

Not to undercut your business, but for anyone interested I have a set of these I bought off of here that are brand new, never rode on I'm selling. I'm selling my quad, and the set is brand new if anyone is interested, same price, 125 shipped

[marinenyc]

What about the longer sprocket bolts? Can u just replace with bolts from the hardware store? And what colors are the sprocket guard powder coated. Please dont tell me they are white.

[racer 557]

yes there white and my bolts were fine and i used stock washers plus ones included and still had more room on stud

good product cant wait to test it

[marinenyc]

Might be a good product but Why the **** White?. Im not rocking that ****. Sorry man. Ill Spend 250 on a blingstar set up b4 I roll with that.

[TRAXX]

We have the dual sprocket guard kits for all 450r/400ex and a rotor guard. Check us out www.traxxperformance.com

[rideredxc]

Originally posted by TRAXX
We have the dual sprocket guard kits for all 450r/400ex and a rotor guard. Check us out www.traxxperformance.com

way to highjack someones thread.