3" riser

[yamahahaha]

will the cables b long enough for a 3" rise?

[yamahahaha]

anyone???

[skomar]

no, they are just barely long enough to go an inch

[yamahahaha]

who makes good extensions?

[skomar]

I ordered ones from rocky mountain atv that add 1.2 inches height and love them. They seem to be very good quality and a must for a rider over 6ft.

Tusk makes them and they are only $20

http://www.rockymountainatvmc.com/productDetail.do?navType=type&navTitle=Handlebars-Control&webTypeId=70&webCatId=12&stockId=212332&prodFamilyId=25849

[yamahahaha]

I already got the rise... for a fat bar

[yamahahaha]

Originally posted by skomar
I ordered ones from rocky mountain atv that add 1.2 inches height and love them. They seem to be very good quality and a must for a rider over 6ft.

Tusk makes them and they are only $20

http://www.rockymountainatvmc.com/productDetail.do?navType=type&navTitle=Handlebars-Control&webTypeId=70&webCatId=12&stockId=212332&prodFamilyId=25849

how much cable slack was left after u put that riser on?

[banker30]

hm i had a +4 +1 stem and i used the stock cables.. just route them different

[mxpimp2000]

Originally posted by banker30
hm i had a +4 +1 stem and i used the stock cables.. just route them different

i got a +2 stem with stock cables. i had to route them diff but the throttle cable is almost too short i wouldnt be able to go another inch

[yamahahaha]

im actually putting it on tomoro, ill tell ya all how it works out, and if u see this b4 i do it, where did u re route them (generally)

[mxpimp2000]

Originally posted by yamahahaha
im actually putting it on tomoro, ill tell ya all how it works out, and if u see this b4 i do it, where did u re route them (generally)

take them out of all the holders on the frame and on the head for the clutch cable. also u can remove ur plastic sheild under the gas tank so it will sit against the bottom of the tank

[yamahahaha]

k, thanks alot!

[yamahahaha]

put riser on, cables were fine! just took park brake cable, throttle cable out of holder. and it is good. thanks for the help, i was going to order longer clutch and throttle cable, u guys saved me atleast $50 and the labour of doing it.

[400exrider99]

were your brake lines long enough too

[yamahahaha]

i had to get a longer front brake cable and w.e, i used russel. also got a motion pro throttle cable