ZX11
01-30-2010, 10:24 PM
Is is normal for the DS450 to have some play in the steering? The helm joints on the tie rods seem to have some movement when the handlebars are moved and the front wheels held still. The joint is tight to the rod. It has been like this since new. The handlebars just move about an 1/16 to 1/8 inch before the front wheels start to move.
I am not sure how tight these ATVs are supposed to be. The steering joints on my shifter kart have no play but it runs on smoother surfaces at a lot higher speeds so its tolerances might be better (it was alot more expensive).
I am not sure how tight these ATVs are supposed to be. The steering joints on my shifter kart have no play but it runs on smoother surfaces at a lot higher speeds so its tolerances might be better (it was alot more expensive).