Tons Of Aftermarket Parts 4 Sale!

[schiavo250r]

Custom Axis Shocks Front Comp & Reb Adj 800
(Walsh Chassis) 19.25"

Custom Axis PRS rear 700
(Walsh Chassis) can measure b/c I beleive it may fit CR500 link as well

Elka Elites all 3 For a Walsh Chassis 1500
(will measure if needed b/c will fit other models) 19.25" Fronts

Maier Shiney Red Plastics sold

Ac Bumper 40

Seat 125

Pro Pegs 175

Rossier Pipe and Silencer for Walsh CRF 150

LSR 250r Bearing Carrier MINT sold

Polished Pro design Shifter sold

Roll Design Chassis 2900

Team Axle and Hubs sold

Will post More with Pics email me with your 250r or CRF Hybrid Needs

schiavo250r@aol.com

[schiavo250r]

Bearing Carrier

[schiavo250r]

Shifter

[250rPRIDE]

any pics of plastic i am interested.. any cracks how are they cut.. ect? what about shipping cost?
also interested in seat too

thanks

[yz450hybrid]

are the bearings good in the lsr carrier?

[schiavo250r]

Yes they are mint

[schiavo250r]

Yes they are mint

[yz450hybrid]

I could use this lsr carrier with a 250r lsr swingarm and 400ex axle right?

I just want to make sure that the 400ex rpm axle will work with this carrier? as long as i use 400ex rear hubs, caliper,etc. correct?

[rayman375]

Are you parting out a quad?

[schiavo250r]

I am not parting out the whole quad I am selling the parts I do not want or need off the crf. Some of the other parts Are just off of other bikes and I have had as spares.

[schiavo250r]

plastic

[Derrick Adams]

Can I please see a picture of the rear fenders on the other side? Is the trimming matched to the left side, or hacked to clear your kicker?

[schiavo250r]

Here is a pic of the kicker side as you can see where the pipe is it is melted out. Also the rear plastics and seat are not latched in the pic so it looks like there is a gap between seat and tank. When it is latched down there is no gap

[schiavo250r]

Bumper

[schiavo250r]

axle1

[schiavo250r]

Another pic

[schiavo250r]

Rossier Pipe

[schiavo250r]

Rossier pipe pic 2

[schiavo250r]

Bump

[fisheye]

axle sold?

[schiavo250r]

Axle is sold

[baker250r]

shocks??

[schiavo250r]

I have some shocks what exactly
are you looking for

[baker250r]

i jsut saw u had the axis comp and rebound adj that were in the pictures. wondering if u still had them

[schiavo250r]

Yes I do and they are still avail

[Frankenstein87]

Take $100 for the plastics shipped to 30736?

[schiavo250r]

Plastics were sold a while ago sorry

[Frankenstein87]

Can you send me a list of what you have left? chrisandmeghann@yahoo.com

[bloodswet&gears]

do you still have the seat for sale? what condition is it in?

[schiavo250r]

I still have the seat get me your email and I will email better pics.