PDA

View Full Version : I.C.E. Silver Rocket Ice Racing Screws



countypark
01-30-2010, 11:59 AM
I have 2000 1 inch SILVER ROCKET Ice Racing Screws.

These are the only screws that are allowed to be used in the I.C.E. Indoor Ice Racing Series. www.icespeedway.com.

Buy them before next weekend and get some $5.00 off coupons for the Feb. 6th race in Cincinatti.

price is $90 shipped per 1000

This is less than you pay if you buy them directly from Icespeedway.

I cannot make these races this season so I no longer need them.

Take it from me you will need 2000 for all four tires.

800screws
01-31-2010, 02:11 PM
PM'd

ur mailbox is full

i have a question...i 'm running the cheng shin 18" ice tires with 1 inch screws...i'm running a lt500..the screws originally ripped out, of course causing flats...i then tried to line them with carpets and use tubes, and again they went flat....

any chance of sending u the tires and rims and setting them up to be reliable? i will take the screws off your hands also...? let me know asap because i plan on taking all the screws out and starting over with new tires and 1/2 inch screws so they don't break through the tire...

countypark
01-31-2010, 02:58 PM
This is how I ran mine. I.C.E. has rules on screw placement so make sure you refer to the rules. I don't think mine were right per the ICE rules.

800screws
01-31-2010, 04:42 PM
what did u have as a liner? or did u not use one? the 1" studs would rip out and cause an air leak...

countypark
01-31-2010, 06:03 PM
No liner at all. I just ran them in with my cordless drill. they are 1 inch long. Still holding air and I havent lost any screws in 5 rounds.

countypark
02-02-2010, 02:03 PM
I sent them back to icespeedway