IcutMetl
01-28-2010, 02:46 PM
Could anyone take some detailed pictures of how your pro-peg style nerf bars mount on the front portion? I bought a pair of "new never mounted" Graydon Proline pro-peg style nerfs a while back and got a killer deal.
The rear mounts for my '89 frame are there, but the steel portion that fits inside the nerf bar tubing is very very sloppy; I'm going to modify these and weld in a piece of bigger tubing to fit tighter. The front mount was missing, and I'm assuming I'm going to create a "tube and plate" mount and use the square "U" bolts. Either that, or instead of using u-bolts, drill holes thru my 1/4" thick skid plate and use flat head cap screws that'll fit flush, and lock-nuts on the top of the mounting plate. I could always mill a slot in my skid plate so that the u-bolt will mount flush and grab directly onto the frame. It's a project I've been putting off, but want to start on next week.
Just brainstorming here...any ideas?
The rear mounts for my '89 frame are there, but the steel portion that fits inside the nerf bar tubing is very very sloppy; I'm going to modify these and weld in a piece of bigger tubing to fit tighter. The front mount was missing, and I'm assuming I'm going to create a "tube and plate" mount and use the square "U" bolts. Either that, or instead of using u-bolts, drill holes thru my 1/4" thick skid plate and use flat head cap screws that'll fit flush, and lock-nuts on the top of the mounting plate. I could always mill a slot in my skid plate so that the u-bolt will mount flush and grab directly onto the frame. It's a project I've been putting off, but want to start on next week.
Just brainstorming here...any ideas?