Pro Armor Tether Kill Switch Installation on 2009 YFZ-R?

[yamaha_maniack]

Hey guys,
I was wondering if anyone could give me some instruction on installing the Pro Armor tether kill switch onto my 2009 YFZ 450R. Ive never done this type of thing before, and someone said if you dont install it right on the 2009 YFZ-R's then it will mess up some crap and "foul a coil" or something like that..

I dont know if it is any different for the previous yfz models or not, so if anybody could help me out and give me some instruction it would be great!!
Thanks in advance!

[hendershot106]

ground one wire from the kill switch to the frame under the key switch..with a standard grounding tab...the other wire needs an extension spliced onto and then splice it into the RED wire above the front sprocket.

THERE IS A white harness connection that has TWO wires in it. One wire is white...one is red.... attach the wire to the red on on the main side of the harness. Make sure you tape it up tight and secure and zip ty the wire tight to the harness to keep out of the sprocket.....

DO NOT SPLICE IT INTO ANYTHING ELSE.

[yamaha_maniack]

alright awesome! anything else i should know?
Thanks!