PDA

View Full Version : 97 blaster



mbakes11
01-24-2010, 03:57 PM
alright so i took the carb apart and cleaned it out. i tried starting the blaster and it still didnt do anything. so next i took the spark plug out and cleaned it and put it back in.......and first crank it started right up. it didnt stay started for very long but it cranked over probably 5 times before it wouldnt start anymore. so i took the spark plug out again and did the same thing and it started right up again but bogged out really fast. it continued doing this for a little while and now it will not start again. could this possibly be a bad plug/plug wire? i am kind of stumped but feel that the problem has to be in that are.

headache
01-25-2010, 12:54 PM
what does the plug look like? is it black and or wet? go to O'reillys auto parts and get a couple new plugs. they are only 2 dollars a piece there. then try it..

atvextremerider
04-23-2010, 09:51 PM
i would get a new plug and clean all the tubes in the carb and also check the Air filter because that filter might because dirty